3 inch lift with P285 70 17??

I was thinking that was more than 3" looks nice

 

That is a beautiful truck.

 

Thank you!

 

coorect me if im wrong but it looks like ur truck still has a small amount of rake? im adding 1.5" in the rear and 3" up front so im hoping I will sit level?

 

Beautiful truck man!

BTW, I see that you posted your location as NW NC. Are you near the Banner Elk, Beech Mountain, or Grandfather Mountain area?

 

Very true! Here's mine with 5100's @ 1.75 with 285/70r17 Good Year MTR's BUT with FJ cruiser wheels. Identical in specs to the 17" Tacoma TRD 5 spoke wheel except for the offset being .75"'s different (sticks out .75"'s more than OEM Tacoma wheels.

 

It does actually. I was kind of surprised. I honestly looks like I did 3"/2.5". Oh well, with my car, I would add/reduce weight in the rear to dial it in lol, but my OCD has not thrown a fit just yet Honestly, that is the most level pic I have due to uneven ground. Check my Flickr for other pics. My last truck was similar…

IMG_1565 by Audiyos, on Flickr

Thanks!

I am in Wilkes, but visit Boone often (about 30 miles). Where are you?

EDIT: I see you are in Miami. I have an Audi buddy from Miami that has a condo in Chetola.

 

i run toyos LT during the summ, fall, spring. Very stiff tire. does not roll like the p rated ones. I like the ride though. I run duratrac in the winter on a different wheel setup

please consider i like a more stiff ride since im use to driving on lower profile tire cars so it may not be for you

 

Did you guys replace your uca's? I would love to go with 285/70/17 I have the stock sport rims and stocks uca's

 

I did to get them back into spec.

 

how long were you out of spec for?

 

not long maybe few hundred miles. ucas help get the desired caster. before the truck ran some pretty positive camber.

 

I'm still on stock UCA's. i haven't put in the budget for new ones yet, i get a small rub at full lock on the lower arm but i just don't make hard turns until i get new ones.

 

Looks good! Getting my Icon stage 1 lift tomorrow and am ordering the same wheels this month when they come back in stock. Just curious what trimming, if any, you did to get those to not rub? I am getting the 17x8.5 SCS with 285/70r17's with some toyo at2's so should be similar to your setup.

 

I have a 2005 Tacoma TRD off road. I recently installed a 3inch rough country lift. I also bought factory 17inch 5 spoke Tacoma wheels. I put nitto terra grapplers 285/70/17 on them. They look, ride and fit awesome. I didn't need to trim fenders or wheel wells. The only place I rub and its when turned probably 80% is on the frame of the truck. Thinking of installing wheel spacers. Any good suggestions on brand and size? I don't really want to stick out past the fenders but I also don't want to rub my frame

 

What wheels are those...?

 

OME lift and 285/75/16

 

I have a 15 sport 4dr looking to put xd monster 2 rims 9 x 17 and toyo p285/70/r17 tires lift will be bilstein 5100 with coils or 6112 kit front and add a leaf 2" rear with matching shocks
whats a good uca?
rims have 12mm offset
would i have any rubbing issues with this set up? thanks for input

 

Look like scs 6

 

Hey bro what time do you have on em im trying to do the same set up as you