2nd Gen 4x4 35s 3" Lift w/o BODY LIFT

I just like the skinnier tire. I won't say how long they lasted but I remember him posting up that they were holding up well with miles. I think he got them through an online auction for pretty cheap though. Hankooks looked to be the cheapest and best tire for the money. I got the MTRs for $270 so they weren't much more than the hankooks.

 

The weird thing about the 35's is that there is much more selection with the 35x12.5x17...
Just like there are a wide variety of 315/75r16...

35x10.5x16 is not really common from what I've seen.

I was looking into a 36x12.5x17 - good luck with that size...

 

No doubt! I damn near ruptured my spleen trying to get the new spare on the tire gate...

I will say this Kase: the Nitto Trails are surprisingly quiet on the hwy compared to other mt's - I'd say they are no louder than the BFG's at's I had before.
Also - they wear like a beast and perform wonderfully off road.

Just my $.02 my friend.

 

Oh yeah... Forgot you had a smaller hamster running on the wheel.

 

4.88 would help you a lot.

The little hamster would thank you.

 

I can measure my MTRs in an hour. They don't even have 1k on them yet. I wouldn't buy fierce attitudes just based off the name. Gayyyyyy

 

I really like mine. I had the ATZs before them and those were great as well. I prefer having the sipes on a MT since FL has a rainy season and lots of highway driving.

 

Mtrs

 

Maxxis are no joke - seen a few folks running them @ Rausch.

 

All three are great choices Kase. Are you concerned with treadlife at all? I dont have 35's....but been loving my 33" MTR-k's. Been wearing faster than the duratracs i had previously but that was a given. I have about 4k on them (lots of road miles) and they're showing a bit more wear than i'd like to see. They are an aggressive softer MT tire so I wasnt expecting a 50k tire but i'll take it for how well they do when off pavement.

 

not bad for 18psi


e rated but flex well

fitting pretty good now...almost have all the major spots banged out

 

I still need to trim my bumper...

 

MTR's plus you cant rotate the Baja Claws unless you pop them off the wheels

 

Interesting choice.

 

I want the coopers that bob got. Couldn't find them at a decent price though . I haven't heard anything bad about the big horns just not what I see you getting.

 

Do you think the offset of those wheels helps or hurts fitting the 35s? I love them but I am going to get spindles as well and I think it will be really wide. Maybe too wide.

 

So with running dirty fives especially with wheel spacers the tires stick out a little wide. Found these Action Long John mud flap flairs, they cover the tire enough now to be legal.

Will get better pics when finished

 

More pictures please.

 

How u mount to fender as well

 

Ill prob do a write up this weekend when i finish them.

I cut tabs in the fenders when I originally cut them. Ill be using a L bracket in a few spots as well.

My one concern is I've ripped off the fender flare 2wice before cause lota the trails I run are so tight so these might not last too long. I'm looking at fibreglass for the front so only doing rear flares for now.

My buddy just built his 2014 to the tits and used these front and back. He also did a full firewall tub to clear his 35 mtrs. No rubbing what so ever, he could fit 37's with only a little rubbing. He's running TC stock length uppers and lowers with kings set to less then 2" lift as well.