SOLD: Bedslide for short bed

THIS HAS BEEN SOLD. (Leaving the post for reference)

I removed the BedSlide from my 1st Gen (2003) double cab. It fills the width between the wheel wells. It will also fit into a 2nd gen.

It is in fully functioning, great condition, I haven't used it since the first few months of having my truck.

The platform measures 51" x 32".
There are three indexed locked positions to allow you to slide it out to different positions: fully extended 103" from front of bed to end of platform, half extended 83" and fully closed.
I am not sure of the exact weight, but I am guessing somewhere between 50-75lbs as I can lift it without too much issue and feels similar to the 50lb chicken feed bags I toss around every month.

Hoping to sell local to SF Bay Area before I start considering dealing with freight.

PRICE DROP TO $300 for Bay Area pickup. I may be convinced to meet up with you somewhere within 50-100 miles.
--Let's start this at $450 OBO picked up in Oakland with possibility of delivery or meetup.--

 

I just heard back from Luis Munoz at BedSlide:
"The unit you have is a 2225C and has a weight capacity of 1,200 lbs."

 

I wish it would work for my tacoma! It's worth at least $700!

 

Bump. If you're interested, don't be scared by my asking price. Send me a PM and let's talk.

 

Picked up the truck from the shop last weekend. Send me an offer.

I could be talked into delivering to Boulder/Denver August 30-September 1st (2014) as I will be traveling through.

 

Bump.

 

I'm interested if you still have this... do you have any more plans on being out in the Denver/Boulder area?

 

Think this would fit a 2nd gen?

 

I do still have it. My plans are unknown for heading out to Denver/Boulder anytime soon with the truck.

Sure. I listed the dimensions, so you'll have to verify and figure out the mounting in the composite bed.

 

I'll let ya know when I get home tonight!

 

Bump. Small price drop. I need some gas money to drive over to Arizona to help with a family member's estate.

 

Oh snap, I thought this sold already! Let me grab a tape measure and see if it fits!

 

It will fit. It is a bit smaller though than the 2nd gen model. Mine is 39" wide by 59" long.

 

Thanks for chiming in with measurements of a 2nd gen since I don't have one nearby to measure!

 

Yea I just measured. I think I'm gonna jump on this, I need some clearace around the wheel wells because of Bed Cage

 

Bump. I still have this and am planning on moving out of state soon and need to clear out my garage of spare things. I dropped the price significantly in the original post. @VolcomTacoma if you want this, I'll deliver it since I'm pretty sure you are within a 45 min drive from me.

 

I might still be interested bro! Let me take some more measurements since I'm putting a tool box in the bed. Might have to cut it down a bit if it fits

 

damn.. if this was the larger 2nd gen version.. GLWS.. it should go fast!

 

Just FYI for those interested. The decks on these are very, very easy to modify or replace. The frame for the 1st gen and second gen models are the same size. If you want the deck larger just get a piece of 3/4" or 1" plywood, cut it to the size you want that will fit the bed, add some bedliner to it and bolt it to the frame.

 

ooooooh... hmmmmm...