2014 FXR/XBLED questions

I just got my lights in and was wondering....

What lights do I tap into for the halos?

and below is a picture of the grommet where all the wires come out

Is there a way to do this to prevent moisture from getting in the housing as the HID and LED wires

any help would be greatly appreciated thanks

 

1) You can tap the halos (not the pictured connector, but the input of the black cylinder driver) into whichever wires you want to turn them on with.

2) No need to seal any further. That's very well sealed.

 

Andrew are there any possibl way to get replacement connector for the halos?
The small black connector from the picture above.

Mine is messed up and i'd like to get the same type it came with for easier connecting and disconnecting.

 

I'm not certain if we keep any spares of those. Shoot us an email and we'll be glad to check for you: http://www.theretrofitsource.com/contacts.

 

Just put end connections on them you can get at any hardware store. male and females.