blacked out fog lights

Anyone have experience with blacked out fogs. Where to purchase from?

Thanks in advance

 

I got some off ebay that were tinted. you could try that or black them out with VHT Nightshade

 

Do you have a link? Decent quality?

 

I blacked out a set:
http://www.tacomaworld.com/forum/lighting/187831-fog-light-retrofit.html

If you search 'Fog Light Retrofit', you'll find others that have done the same

 

Click here

I then got a switch from OTTRAW for them

 

metrick215,

They mount the same way the stock ones do? I can use my original wiring and switch?

 

I used lamin-x on mine...love it.

 

This looks really good, was it difficult to apply?

 

Didn't do it myself, but it didn't look too hard. They sell kits just for our trucks that would prob work easier.

 

That smoked lamin-x looks good!!

 

I used Lamin-X on both my headlights and foglights. I liked the look but the output loss at night wasn't worth it to me so I pulled them.

 

Not hard, but took me two attempts to do the amber film on mine. Remove the plastic surrounds from the fog light via the clip accessible from behind the bumper. Then clean, and slowly and carefully apply. Lamin-x has install instructions on their websites. Start in the middle and work outward. I gently used a heat gun and it really helps mold it to the curves. If you don't have a heat gun try a hair dryer.

 

Yours are significantly darker than mine. Lol..

Also have clear lamin-x on headlights and the side markers are tinted lightly.

 

That may be because I already had the BHLM when I put them on haha.

 

Yes all the mounts were the same