Ultra gauge mounting location

Some other threads like this, but by far the best one for collection of possible locations. For a 1st gen, seems like the best is on the steering column in the little groove. Might have to make that set-up work tonight.

Sub'd for more!

 

Takes one. Just gotta press and hold the "up scroll" button

 

That's to reset the fuel tank gals. Not the Avg fuel mileage.

 

I see. Didn't read the whole convo

 

Windshield mount with wire running down driver door weather seal.



Matt

 

Haha... No worries man. I'm guilty of that quite often

 

That looks good Matt!

 

Hoz mount...Pull the tray out and ran the wire along the side of the tray...very easy to do..

 

Ok , link to the Hoz mount ?
Search engines are getting fukn worthless these days .
Sarge

 

http://ultra-gauge.com/ZC/index.php...oducts_id=37&zenid=n043nd9ntp2kitontd4epkmv16

 

I installed mine above the mirror. Great spot to glance up and still be aware of whats going on outside the window.

 

Modified a ProClip mount.

 

Where I wound up putting mine:



I used a hinge to mount it on, so it flips up for access to the controls.



Details in my modest little build thread. Click the sig.

 

I used a RAM mount to locate the Ultragauge above the mirror.

 

Had it above the rear view mirror ... Then saw ImMrYo's mirror relo bracket

Put it top left of windshield ... To much heat from the sun

Here's the 3rd location... I've been using 3M command strips to temp install so I can move it again if the mood hits me

 

Finally got around to installing mine! Here's the install location:

 

subd for relocation

 

Got my UltraGauge today!! Mounted it in the usual spot! Took 3 minutes!

 

subbed good info

 

I have a similar mirror relocate done with the ram ball, whats the rest of the set up to make this happen? Very nice