Looking for SPDT (single pole double throw) switch information

I am looking for some info on SPDT switches.

I am looking for a few to add to my truck to independently control back up lights and an LED front light bar.

I need the SPDT switches so I can turn the lights on via the high beam switch and the back up switch and independently of the high beam switch and back up switch.

Ive found non lighted non marked SPDT switches but I want lighted and marked switches.

I am looking for something similar to the OTRATTW switches like these -



But SPDT

:beer:

 

Awesome. I didnt realize OTRATTW sold those switch in pieces like that. Thanks :beer:

 

Do all OTRATTW swictches fit the shock holes in new body tacos?

 

The ones left of the steering wheel need a little trimming, the ones below the a/c controls won't fit without some major trimming. OP don't forget to use a diode if you are tying in to the OEM wiring harness with the SPDT switch.

 

The air on board switches are oem replacements and fit without modification

http://www.tacomaworld.com/forum/2n...t-install-guide-no-holes-no-wire-cutting.html

 

Do they make those in SPDT as well?

Im not installing mine in any OEM spots, but would still like an OEM looking switch

 

I am looking for SPDT switches also, OEM looking but for the center console slots that are smaller. Every time I seem to start heading in the right direction with a lead that looks promising I reach a dead end.

 

Can you elaborate on this (diode)? I was thinking about this as I am about to install mine.

 

Did anyone ever find a SPDT switch for the center console?