4.30 e-locker third, matching front clamshell & Housing

Hey,
I have two 4.30 e locker thirds for the straight axle guys and a matching 4.30 clamshell for ppl like me with no money for a straight axle
I also have two e locker 4runner housings.
I am asking $500 for an e locker, $200 for the clamshell, and $100 housing.

I have not run the gears, but they look to be in good shape and the motors bench test good. They both have wiring up past the harness connector and are ready to tie into a switch.
I'm located in Vegas and can ship or willing to drive a bit if that will help ya out.




Drew

 

Sending you a PM now

 

Would u sell a locker motor separate?

 

Sorry but I would like to keep these intact.

 

One e-locker left. Everything else sold or pending.

 

Price on e locker motor?

 

Still want to keep this guy intact. You could buy the complete third and keep yours for parts

 

How much did you get out of each of the other parts?

 

PM Sent.

 

I have a 04 tacoma with the B07A code, looking to add a rear elocker will these work and how hard is it to wire one up non TRD

 

Building the wiring harness isn't to difficult. Lowrange offroad makes a cool DPDT switch that I wish I had used when I did my last one. You can also buy a pre-made harness, but for the money I'd build my own.
The biggest issue your going to run into is you will need to replace you whole rear housing. I believe that you have the 8.4 rear diff like I had in my 98 non trd taco. You can use the 4runner housing that I have (both thirds and a housing still available btw) just cut the link brackets off and weld on some perches. Or you'll need to find a Tacoma 8 in housing.

 

ok how much for the third and housing shipped to 97470 total price

 

Both Lockers and a housing still up for sale.

 

Everything but the 4runner elocker housing sold.