disconnecting middle seatbelt on bench seat

JBeasty · 05-10-2008, 11:16 PM

Has anyone figured out how to disconnect the middle seat belt on the standard cab, bench seat Tacoma? Sometimes when I try to flip the seat forward, The seat belt locks up and keeps the seat from folding forward. Also, I'll probably never use it, and its just kinda in the way.
Thanks, JB

chris4x4 · 05-11-2008, 06:07 AM

It should be bolted to the cab. Remove (if you cant slide the seat far enough foward) the bench seat and unbolt the center seat belt. Easy to do.

JBeasty · 05-11-2008, 09:45 AM

I was afraid of that! I was hoping there was some way to undo it at the pivot point for the shoulder harness. That way I could just have it under the seat in case I ever need it. Toyota sure doesn't make it easy to alter safety features do they . . .

SPOWERS07 · 05-12-2008, 12:29 PM

no you dont have to do that all you have to do is grab a really small flat head screw driver and push the little gray button in then the seat belt disconnects and you can tuck it behind the seat, its where the belt connects to the seat

chris4x4 · 05-12-2008, 03:55 PM

Must be different on the newer reg cabs then. I had to unbolt them on mine. Thanks for the correction.

JBeasty · 05-13-2008, 09:29 PM

Yeah, I have a little grey "dimple" where the button used to be. I went by Toyota today. The Mechanic was all ready with his little screw driver, then saw there was no button.
Probably a cost saving measure. Or maybe the button was removed because of some law suit.
Pisses me off

. Now to get the thing out of the way, I have to eliminate the middle seat belt, rather than just temporarily disconnecting it.

SPOWERS07 · 05-14-2008, 05:32 AM

thats weird i work at a dealership ill go out to an 08 and look cuz mines an 07 and i have that little dimple

JBeasty · 05-16-2008, 10:11 PM

SPOWERS, Do tell if you find something out about disconnecting the middle seat belt! Thanks, JB

Cusker · 05-18-2008, 03:05 PM

You can seperate the two halves of the seat belt to "unbuckle" it but it's a pain in the rear. To save everybody else the trouble simply drill a small hole as shown in the picture below. Once done insert a straightened paperclip into the hole and voila, you have unbuckled the center seatbelt and can do so at anytime without having to pry the two halves apart.

http://picasaweb.google.com/notnert/SeatBelt

Trenton

JBeasty · 05-18-2008, 06:20 PM

Thanks Dudes!

I ended up cutting a rectangular notch just big enough for my key to fit into. Took pics for any one interested (they came out blurry though). Now if I ever need to use the middle seat belt, it's still under the seat.

lawnrevenge · 05-18-2008, 06:46 PM

That was my first mod. Did it after two friends thought I'd drive them both home at the same time. Made the belt disappear and now I have an excuse. Mine's an 08.

05-10-2008, 11:16 PM	#1
JBeasty Junior Member Joined: Apr 2008, #6232 Location: Northern California Posts: 19 08 standard cab, 2.7L, 4 sp auto. 2008 Regular Cab Automatic None yet	disconnecting middle seatbelt on bench seat Has anyone figured out how to disconnect the middle seat belt on the standard cab, bench seat Tacoma? Sometimes when I try to flip the seat forward, The seat belt locks up and keeps the seat from folding forward. Also, I'll probably never use it, and its just kinda in the way. Thanks, JB

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
No towing package on 4x2 in middle-Atlantic?	camsbored	Towing	11	04-18-2008 10:08 PM
Front Bench seat seatbelt..	raycie	Technical Chat	0	03-12-2008 10:11 AM
Seat covers for '05-'08 bench seats	chad68	2nd Gen. Tacomas	7	01-18-2008 08:17 PM
stock bench seat mod	phantom	Technical Chat	0	11-05-2007 10:38 AM
Seat Cover for Reg. Cab bench seat	asdfjkl	2nd Gen. Tacomas	0	07-14-2007 06:00 PM

05-11-2008, 06:07 AM	#2
chris4x4 Western Alliance: Fix it division Joined: May 2008, #6497 Location: Tempe ,Az Posts: 2,239 2007 PreRunner 2007 Double Cab Automatic 1GR-FE (4.0 V6) OME 885's, OME shocks, Total Chaos UCA's, TSB springs with AAL, 5100 rear shocks, custom built fuel tank skid plate	It should be bolted to the cab. Remove (if you cant slide the seat far enough foward) the bench seat and unbolt the center seat belt. Easy to do.

05-11-2008, 09:45 AM	#3
JBeasty Junior Member Joined: Apr 2008, #6232 Location: Northern California Posts: 19 08 standard cab, 2.7L, 4 sp auto. 2008 Regular Cab Automatic None yet	I was afraid of that! I was hoping there was some way to undo it at the pivot point for the shoulder harness. That way I could just have it under the seat in case I ever need it. Toyota sure doesn't make it easy to alter safety features do they . . .

05-12-2008, 12:29 PM	#4
SPOWERS07 Member Joined: Jan 2007, #816 Location: Massachusetts Age: 23 Posts: 66	no you dont have to do that all you have to do is grab a really small flat head screw driver and push the little gray button in then the seat belt disconnects and you can tuck it behind the seat, its where the belt connects to the seat

05-12-2008, 03:55 PM	#5
chris4x4 Western Alliance: Fix it division Joined: May 2008, #6497 Location: Tempe ,Az Posts: 2,239 2007 PreRunner 2007 Double Cab Automatic 1GR-FE (4.0 V6) OME 885's, OME shocks, Total Chaos UCA's, TSB springs with AAL, 5100 rear shocks, custom built fuel tank skid plate	Must be different on the newer reg cabs then. I had to unbolt them on mine. Thanks for the correction.

05-13-2008, 09:29 PM	#6
JBeasty Junior Member Joined: Apr 2008, #6232 Location: Northern California Posts: 19 08 standard cab, 2.7L, 4 sp auto. 2008 Regular Cab Automatic None yet	Yeah, I have a little grey "dimple" where the button used to be. I went by Toyota today. The Mechanic was all ready with his little screw driver, then saw there was no button. Probably a cost saving measure. Or maybe the button was removed because of some law suit. Pisses me off . Now to get the thing out of the way, I have to eliminate the middle seat belt, rather than just temporarily disconnecting it.

05-14-2008, 05:32 AM	#7
SPOWERS07 Member Joined: Jan 2007, #816 Location: Massachusetts Age: 23 Posts: 66	thats weird i work at a dealership ill go out to an 08 and look cuz mines an 07 and i have that little dimple

05-16-2008, 10:11 PM	#8
JBeasty Junior Member Joined: Apr 2008, #6232 Location: Northern California Posts: 19 08 standard cab, 2.7L, 4 sp auto. 2008 Regular Cab Automatic None yet	SPOWERS, Do tell if you find something out about disconnecting the middle seat belt! Thanks, JB

05-18-2008, 03:05 PM	#9
Cusker Junior Member Joined: Feb 2008, #4896 Posts: 4	You can seperate the two halves of the seat belt to "unbuckle" it but it's a pain in the rear. To save everybody else the trouble simply drill a small hole as shown in the picture below. Once done insert a straightened paperclip into the hole and voila, you have unbuckled the center seatbelt and can do so at anytime without having to pry the two halves apart. http://picasaweb.google.com/notnert/SeatBelt Trenton

05-18-2008, 06:20 PM	#10
JBeasty Junior Member Joined: Apr 2008, #6232 Location: Northern California Posts: 19 08 standard cab, 2.7L, 4 sp auto. 2008 Regular Cab Automatic None yet	Thanks Dudes! I ended up cutting a rectangular notch just big enough for my key to fit into. Took pics for any one interested (they came out blurry though). Now if I ever need to use the middle seat belt, it's still under the seat.

05-18-2008, 06:46 PM	#11
lawnrevenge Senior Member Joined: Feb 2008, #4697 Location: Southern Mexifornia Posts: 125 08 regular cab 5-lug, automatic 2008 Regular Cab Automatic	That was my first mod. Did it after two friends thought I'd drive them both home at the same time. Made the belt disappear and now I have an excuse. Mine's an 08.