FS: ORI Strut kit w/remote resi's, dual fill kit, h.p. regulator

ORI strut kit with remote reservoirs purchased from BAMF earlier this year. 8" struts with BAMF mounting hardware and all nuts, bolts, bushings, etc. for 2nd gen. Tacoma installation. ORI dual fill nitrogen kit with additional pressure gauges via a quick-disconnect for low pressure and high pressure readings. Harris 8700 high pressure regulator also included.

This is everything you need to install and tune the struts, except for a nitrogen tank. I put these on my truck in April this year and spent a lot of time adjusting the upper and lower chamber pressures for ride quality. Like a few other TW members here, I thought the rebound damping was not tuned well for the weight of a Tacoma so I sent the struts to the manufacturer and they adjusted the internal valves for better rebound damping. I haven't installed them back on my truck since ORI returned them to me so I don't really know how their adjustment changed the rebound damping. I put my old Icon coil-overs on the truck while I waited for ORI to send them back to me, and honestly I just don't want to swap them back again, I'm happy enough with the Icons so that's why I'm selling these. I estimate I drove 800-1000 miles with these installed, with a few adventures on forest service roads. They are in excellent condition and haven't been installed since they came back to me from ORI.

The Harris 8700 high pressure regulator is expensive but necessary because it provides pressure up to 1500 psi, more than you will need, but lower pressure regulators approach their working limit if you put 700-800 psi in the upper chambers. I put a quick-disconnect on the ORI dual fill kit so that you can read a lower pressure gauge when filling the lower chambers to 90-100 psi and a higher pressure gauge for filling the top chambers around 700 psi. That way you get accurate readings for both the upper and lower chambers.

Price for everything is $1700, which is about $550 less than the price for everything new. Shipping will be $50 for the Western U.S., a little more if you are way back east. I'm in Medford Oregon and local pickup is welcome and I can also meet you in Portland. Send me a message, I'll be happy to answer any questions.

Andrew

 

bump

 

GLWS

 

bump

 

bump

 

I'd be all over this if I knew they would work with all pro long travel. GLWS - good deal!

 

bump

 

Thats a great deal! Too bad the MXP/USD rate has gone too high!!!

 

Bump. Christmas is almost here, doesn't your favorite loved one (you know it's your Tacoma) deserve a special gift for the holidays?

 

Bump.

 

Subd!!!!

 

How funny I'm in Medford too but the wife rolled her eyes when I said I wanted to "spend more money on my truck"

 

Update: I still have these ORI struts. Price reduction for individual items if you don't want everything together: struts with remote resi's $1200, ORI fill valve $200, Harris hi-pressure regulator $200, OR $1500 for everything. Sorry, I do not accept PayPal so payment will have to be cash or wait for a check to clear. I understand that might be a problem for some people but after a bad experience I just won't use PayPal anymore. If you are serious about buying these I don't mind driving as far north as Portland and I can even help install them. I have a nitrogen tank I'll sell if you need that too.

 

bump

 

bump

 

bump

 

bump

 

Thought I would throw this out there. Larger remote reservoirs will be available shortly for these. Should soften the ride for the Tacoma quite a bit and protect that main rod seal.

 

These things still available?