Rigid duallies into OEM fogs wiring.

Can I wire the Duallies directly to my fog wiring or will they be too much for the stock circuit? Also, are there plugs or adapters I can use to not cut the stock wiring?

 

You should be fine. I run 4 pods off of my stock fog wiring and never had a problem. I have them on all the time when I'm driving. And in order to not cut the stock harness I used a plug from an hid harness I had for my fogs

 

The duallies have a lower draw than the stock fogs, you are all good!

 

I bought a set of these http://www.ebay.com/itm/H11-Headlig...r_Truck_Parts_Accessories&hash=item19f8d9ffdb and put them on the ends of the Rigid harnesses. This way it plugs directly into the stock fog light harness with no cutting.

 

Thats a good idea, might need to get a handful of those.

 

OR

http://www.newegg.com/Product/Product.aspx?Item=9SIA0WW0C01076

 

do you have these on your taco? do they fit? just curious because i thought it was a h11 for the size or whatever and these are an h10 please let me know thanks.

 

This is the exact connector I used to hook up my duallys. I cut the connector in half and spliced the female end on to the light. Took 5 minutes.
http://www.ebay.com/itm/9145-H10-90...r_Truck_Parts_Accessories&hash=item19e66fcca8

 

H10 is the connector size you want.

 

ok thanks just ordered some

 

H11's are 2012+ (using them in my '12)
H10's were prior to 2012, I believe.

 

I also just attached the factory dually harness to my stock fog light wiring. Here is my write up. : http://www.tacomaworld.com/forum/2n...uallys-stock-fog-light-location-all-done.html

 

Great write up Matt and cool use of the Tundra brackets, Rigid will be offering a new Tacoma/Tundra specific bracket like that soon for the 05-11 guys.

MRT Motorsports is now offering a couple of conversion harness from Detusch DT to H10/H11 to make this a literal plug and play install. Will post them up soon.

 

SUBD