1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Wheel Offset and Backspace question

Discussion in '2nd Gen. Tacomas (2005-2015)' started by 300AACTaco, Dec 17, 2014.

  1. Dec 17, 2014 at 8:09 PM
    #1
    300AACTaco

    300AACTaco [OP] Well-Known Member

    Joined:
    Nov 30, 2014
    Member:
    #143378
    Messages:
    2,582
    Vehicle:
    Black '15 DCSB TRD Off Road 4x4
    ARB Old Man Emu 90000s and 60091s OME 886s, Trim Packer, Icon Tubular Uniball UCAs, CMC, Invisible Sway Bar, Dakar Rear Leaf Packs, Timbren Rear Bumpstops, All Pro U-bolt flip up kit, Method Race Wheels NV 16X8 4.5BS, Cooper ST Maxx LT285/75/16, DEPO Black Tail Lights, Weathertech Floormats, Cascadia Vehicle Tents Mt. Shasta in Earth Tone Green, Custom Green Tree Fabrication Bed Rack, N-Fab Spare Tire Bed Mount
    Hi everyone, I was wondering if a fuel krank wheel that is 17x9 With a 5 inch backspace and a +1 offset would fit on my trd off road short bed tacoma, i'm putting them on a 265/70/17 goodyear duratrac. They're one of the few tires that fit a 9 inch wide wheel and is a 265, and I'm doing a 3 inch 5100 bilstein toytec lift with 2 inches in the back.

    [​IMG]
     
  2. Dec 17, 2014 at 10:10 PM
    #2
    SxSW

    SxSW Well-Known Member

    Joined:
    Nov 22, 2014
    Member:
    #142907
    Messages:
    60
    Gender:
    Male
    First Name:
    Joe
    NM
    Vehicle:
    14 Base
    Most people who posted having those wheels have the 4.5bs -12mm offset version. Not sure if the 5bs +1 offset version will work.
    Tires should be fine.
     
  3. Dec 17, 2014 at 11:42 PM
    #3
    jmg256

    jmg256 Calmer than you are

    Joined:
    Sep 1, 2009
    Member:
    #22100
    Messages:
    1,807
    Gender:
    Male
    First Name:
    Al Tonter
    Vehicle:
    TRD Offroad
    Bilstein 5100 front/rear (front at .85), Hayden 678 Trans Cooler, 20% tint, Curt Hitch/Wiring Harness, Weathertech Digital Fit Floor Mats (Black), Wet Okole Seat Covers (Black), Cooper Discoverer ATP 265/75/16, LED Map/Dome lights, ImMrYo bracket, Debadged, Extang Tuff Tonno.
    They'll be fine for the 265 series tire, but if you ever want to run a 285, you'll want the 4.5" back spacing
     
  4. Dec 18, 2014 at 9:38 AM
    #4
    Poofyfoot

    Poofyfoot Well-Known Member

    Joined:
    Oct 23, 2013
    Member:
    #115097
    Messages:
    94
    Gender:
    Male
    First Name:
    Jordan
    Logan, Ohio
    Vehicle:
    89' Pickup and 2013 AC Sport
    They will fit. I run 265/70r17 on my Ballistic Jester 17x9 +0 offset
     
  5. Dec 20, 2014 at 6:04 PM
    #5
    senn4586

    senn4586 Well-Known Member

    Joined:
    Nov 27, 2011
    Member:
    #67797
    Messages:
    204
    Gender:
    Male
    First Name:
    Chris
    Orange County
    Vehicle:
    05 PreRunner SR5 TRD Off Road
    Always on lighter output, Any Time On Fog lights, rear 12v outlet, 4 additional D-Rings, Plasti-Dipped Side Steps, Satoshi Color Matched Grill, Dash light swap, Dome light and map light, Under hood light, Back up light/Bed Light, Diff Breather relocation, Cubby Combo Lock, Ammo Cans Mounted in bed
    The problems will start if you go bigger than the 265/70/17 since it runs like crazy. A buddy has those and has had to replace two flares do to rubbing.
     
  6. Dec 20, 2014 at 6:36 PM
    #6
    SpruceTaco

    SpruceTaco トヨタ

    Joined:
    May 18, 2012
    Member:
    #79082
    Messages:
    12,287
    Gender:
    Male
    First Name:
    Mike
    Clearwater, FL
    Vehicle:
    2012 Spruce Mica TRD Sport
    Tinted windows 5%, sill protectors, TRD stubby antenna, weathertech in channel rain guards, wheathertech floor mats, BHLM, Truxedo low pro qt, DTRL deleted, anytime backup camera, bed storage locks, fog lights on anytime, tailgate theft deterrent, painted engine cover, relocated horns, l.e.d bed lights, l.e.d engine bay lights, l.e.d lights above cup holders, in glove box, rear cup holder, in console storage & cubby next to steering wheel, Grillcraft grill, 17x8.5 SCS Ray10's, 35x12.50 Nitto Ridge Grapplers, Borla cat back exhaust, map & dome l.e.d's, TEQ badge on grill, Redline tuning hood struts, Maxtrac spindles, SPC Light Racing UCA's, Bilstein 5100's front set at 0 with OME 885's & extended length Bilstein 5100's in the rear, All Pro expedition leaf springs & 2" blocks, extended brake lines front & rear, 1.5" 4crawler drive shaft spacer, Beefed Taco carrier bearing drop, 1.25" spidertrax wheel spacers on rear, Kenwood DNX570 touchscreen with navigation, 30" led light bar in lower bumper opening, 1/4" top plate spacer drivers side, Bullet Proof Fabricating skid plate, Cali Raised ditch lights & Rago f Fabrication brackets, Amp Research power steps, smoked l.e.d 3rd brake light, Wet Okole seat covers, under cab LED'S tied to dome circuit
    This is true. Mine are 17x9 -12 & 4.5" bs, with 285's I can just slide my hand between the tire & spindle. Im sure with +1 & 5" bs anything over 265 will rub on the spindles.
     
  7. Aug 17, 2015 at 5:36 PM
    #7
    SkyFlowTaco

    SkyFlowTaco Well-Known Member

    Joined:
    Jul 29, 2015
    Member:
    #160609
    Messages:
    60
    Gender:
    Male
    First Name:
    Dan
    Chesapeake, VA
    Vehicle:
    2014 TRD Sport DCSB
    OEM roof rack, ICON Stage 3, TOYO R/Ts on Fuel rims
    I just ordered 285/70R17 tires on 17x9 fuel kranks from a local shop that told me that I wouldnt be able to fit the -12 offset and that I would have to go with +1. I actually really wanted to run the -12 to get a deeper lip
     
  8. Aug 17, 2015 at 5:44 PM
    #8
    SpruceTaco

    SpruceTaco トヨタ

    Joined:
    May 18, 2012
    Member:
    #79082
    Messages:
    12,287
    Gender:
    Male
    First Name:
    Mike
    Clearwater, FL
    Vehicle:
    2012 Spruce Mica TRD Sport
    Tinted windows 5%, sill protectors, TRD stubby antenna, weathertech in channel rain guards, wheathertech floor mats, BHLM, Truxedo low pro qt, DTRL deleted, anytime backup camera, bed storage locks, fog lights on anytime, tailgate theft deterrent, painted engine cover, relocated horns, l.e.d bed lights, l.e.d engine bay lights, l.e.d lights above cup holders, in glove box, rear cup holder, in console storage & cubby next to steering wheel, Grillcraft grill, 17x8.5 SCS Ray10's, 35x12.50 Nitto Ridge Grapplers, Borla cat back exhaust, map & dome l.e.d's, TEQ badge on grill, Redline tuning hood struts, Maxtrac spindles, SPC Light Racing UCA's, Bilstein 5100's front set at 0 with OME 885's & extended length Bilstein 5100's in the rear, All Pro expedition leaf springs & 2" blocks, extended brake lines front & rear, 1.5" 4crawler drive shaft spacer, Beefed Taco carrier bearing drop, 1.25" spidertrax wheel spacers on rear, Kenwood DNX570 touchscreen with navigation, 30" led light bar in lower bumper opening, 1/4" top plate spacer drivers side, Bullet Proof Fabricating skid plate, Cali Raised ditch lights & Rago f Fabrication brackets, Amp Research power steps, smoked l.e.d 3rd brake light, Wet Okole seat covers, under cab LED'S tied to dome circuit
    I don't know where they got their info but 17x9 with -12 offset, 4.5" bs & 285's fit on my truck with no problems.
     
  9. Aug 17, 2015 at 5:46 PM
    #9
    SkyFlowTaco

    SkyFlowTaco Well-Known Member

    Joined:
    Jul 29, 2015
    Member:
    #160609
    Messages:
    60
    Gender:
    Male
    First Name:
    Dan
    Chesapeake, VA
    Vehicle:
    2014 TRD Sport DCSB
    OEM roof rack, ICON Stage 3, TOYO R/Ts on Fuel rims
    How much lift?
     
  10. Aug 17, 2015 at 5:51 PM
    #10
    SpruceTaco

    SpruceTaco トヨタ

    Joined:
    May 18, 2012
    Member:
    #79082
    Messages:
    12,287
    Gender:
    Male
    First Name:
    Mike
    Clearwater, FL
    Vehicle:
    2012 Spruce Mica TRD Sport
    Tinted windows 5%, sill protectors, TRD stubby antenna, weathertech in channel rain guards, wheathertech floor mats, BHLM, Truxedo low pro qt, DTRL deleted, anytime backup camera, bed storage locks, fog lights on anytime, tailgate theft deterrent, painted engine cover, relocated horns, l.e.d bed lights, l.e.d engine bay lights, l.e.d lights above cup holders, in glove box, rear cup holder, in console storage & cubby next to steering wheel, Grillcraft grill, 17x8.5 SCS Ray10's, 35x12.50 Nitto Ridge Grapplers, Borla cat back exhaust, map & dome l.e.d's, TEQ badge on grill, Redline tuning hood struts, Maxtrac spindles, SPC Light Racing UCA's, Bilstein 5100's front set at 0 with OME 885's & extended length Bilstein 5100's in the rear, All Pro expedition leaf springs & 2" blocks, extended brake lines front & rear, 1.5" 4crawler drive shaft spacer, Beefed Taco carrier bearing drop, 1.25" spidertrax wheel spacers on rear, Kenwood DNX570 touchscreen with navigation, 30" led light bar in lower bumper opening, 1/4" top plate spacer drivers side, Bullet Proof Fabricating skid plate, Cali Raised ditch lights & Rago f Fabrication brackets, Amp Research power steps, smoked l.e.d 3rd brake light, Wet Okole seat covers, under cab LED'S tied to dome circuit
    At the time a crappy 3" spacer lift.
     
  11. Aug 17, 2015 at 5:53 PM
    #11
    SkyFlowTaco

    SkyFlowTaco Well-Known Member

    Joined:
    Jul 29, 2015
    Member:
    #160609
    Messages:
    60
    Gender:
    Male
    First Name:
    Dan
    Chesapeake, VA
    Vehicle:
    2014 TRD Sport DCSB
    OEM roof rack, ICON Stage 3, TOYO R/Ts on Fuel rims
    Now I'm so confused. Two different shops told me 3" wasnt enough for 285/70 and -12. My guess is they arent willing to do anything if it requires any trimming.
     
  12. Aug 17, 2015 at 5:57 PM
    #12
    SpruceTaco

    SpruceTaco トヨタ

    Joined:
    May 18, 2012
    Member:
    #79082
    Messages:
    12,287
    Gender:
    Male
    First Name:
    Mike
    Clearwater, FL
    Vehicle:
    2012 Spruce Mica TRD Sport
    Tinted windows 5%, sill protectors, TRD stubby antenna, weathertech in channel rain guards, wheathertech floor mats, BHLM, Truxedo low pro qt, DTRL deleted, anytime backup camera, bed storage locks, fog lights on anytime, tailgate theft deterrent, painted engine cover, relocated horns, l.e.d bed lights, l.e.d engine bay lights, l.e.d lights above cup holders, in glove box, rear cup holder, in console storage & cubby next to steering wheel, Grillcraft grill, 17x8.5 SCS Ray10's, 35x12.50 Nitto Ridge Grapplers, Borla cat back exhaust, map & dome l.e.d's, TEQ badge on grill, Redline tuning hood struts, Maxtrac spindles, SPC Light Racing UCA's, Bilstein 5100's front set at 0 with OME 885's & extended length Bilstein 5100's in the rear, All Pro expedition leaf springs & 2" blocks, extended brake lines front & rear, 1.5" 4crawler drive shaft spacer, Beefed Taco carrier bearing drop, 1.25" spidertrax wheel spacers on rear, Kenwood DNX570 touchscreen with navigation, 30" led light bar in lower bumper opening, 1/4" top plate spacer drivers side, Bullet Proof Fabricating skid plate, Cali Raised ditch lights & Rago f Fabrication brackets, Amp Research power steps, smoked l.e.d 3rd brake light, Wet Okole seat covers, under cab LED'S tied to dome circuit
    I'm sure there is a bunch of guys on here that will disagree.
    They did rub but only like when I backed out of the driveway at full lock.
    Here's a couple pics for proof. Haha
    a844ae696d1c72129e75bad8446ba597_5bba65d7fde7eea48639651aa2b9e51ace097e49.jpg
    99e566ff6ff882ac76861d22c5361658_66fb0047d0bb8bb9404641f6dd6798addfa1ae02.jpg
    bc2e1a59cc134ddca8d13621bd11ea2a_142b5d8e5c207132070d4aab95204bed864de89f.jpg
     
    Trouble_The_Tacoma likes this.
  13. Aug 17, 2015 at 6:00 PM
    #13
    SkyFlowTaco

    SkyFlowTaco Well-Known Member

    Joined:
    Jul 29, 2015
    Member:
    #160609
    Messages:
    60
    Gender:
    Male
    First Name:
    Dan
    Chesapeake, VA
    Vehicle:
    2014 TRD Sport DCSB
    OEM roof rack, ICON Stage 3, TOYO R/Ts on Fuel rims
    Man Im gonna have to call and try to change my order cus the -12 looks perfect. I,ve been looking around for someone that has kranks with +1 offset and havent been able to find a single pic
     
  14. Aug 17, 2015 at 6:05 PM
    #14
    SpruceTaco

    SpruceTaco トヨタ

    Joined:
    May 18, 2012
    Member:
    #79082
    Messages:
    12,287
    Gender:
    Male
    First Name:
    Mike
    Clearwater, FL
    Vehicle:
    2012 Spruce Mica TRD Sport
    Tinted windows 5%, sill protectors, TRD stubby antenna, weathertech in channel rain guards, wheathertech floor mats, BHLM, Truxedo low pro qt, DTRL deleted, anytime backup camera, bed storage locks, fog lights on anytime, tailgate theft deterrent, painted engine cover, relocated horns, l.e.d bed lights, l.e.d engine bay lights, l.e.d lights above cup holders, in glove box, rear cup holder, in console storage & cubby next to steering wheel, Grillcraft grill, 17x8.5 SCS Ray10's, 35x12.50 Nitto Ridge Grapplers, Borla cat back exhaust, map & dome l.e.d's, TEQ badge on grill, Redline tuning hood struts, Maxtrac spindles, SPC Light Racing UCA's, Bilstein 5100's front set at 0 with OME 885's & extended length Bilstein 5100's in the rear, All Pro expedition leaf springs & 2" blocks, extended brake lines front & rear, 1.5" 4crawler drive shaft spacer, Beefed Taco carrier bearing drop, 1.25" spidertrax wheel spacers on rear, Kenwood DNX570 touchscreen with navigation, 30" led light bar in lower bumper opening, 1/4" top plate spacer drivers side, Bullet Proof Fabricating skid plate, Cali Raised ditch lights & Rago f Fabrication brackets, Amp Research power steps, smoked l.e.d 3rd brake light, Wet Okole seat covers, under cab LED'S tied to dome circuit
    I added one more pic.
    Like I said in my post above the tire was pretty close to the spindle & I'd be afraid a +1 with more backspace would rub the spindle. Wish I took pics but I didnt.
     

Products Discussed in

To Top