Post-lift alignment specs OK?

Just wondering if these numbers look good. No idea what I'm looking at.

Initial
Camber
Left 2.96 Right 3.19
Caster
Left .76 Right .48
Toe
Left .06 Right -1.12

Final After Alignment
Camber
Left 2.27 Right 2.26
Caster
Left 1.15 Right .84
Toe
Left .08 Right .07

 

Way to much camber

Way to little caster.

How much did you lift? looks like you need some new UCA's

 

http://www.tacomaworld.com/forum/2nd-gen-tacomas/40470-ucas-alignment.html

 

I think you have your camber and caster numbers wrong. Caster is supposed to be greater than 2 and camber is supposed to be at or very near 0. Toe is also supposed to be at or near 0. And anytime you alter your suspension you probably want to get it realigned otherwise your going to see some bad tire wear.

 

I might have mixed up caster and camber, the sheet I was given has no labels just diagrams. Here it is.

 

yeah, that camber is still high. toe is fine.

You will loose some caster to get the camber number though.

How much lift did you do?

 

Looking at the sheet your camber is way off, worst than initially. Take it back and tell them to readjust your camber to 0. Everything else looks ok just bad camber.

 

Icon Stage 1 up front, dialed in to a 3" lift measured ground to fender, with Light Racing UCA's. This was a reputable local 4X4 shop.