3'lift help with tires

so i found a 3'lift that i like and now i what to know what is a good tire size i should get i have 2009 prerunner 4l2.4l

 

when i ahd my 3in spacer lift at first i ran and still run 285s (33") i have spindles now and can fit 35s... The biggest u could go in 3 in is 285 there might be a little rubbing at full crank depending on what rim size u get.... But there is people on this forum that was able to fit 35s lol.... r u gonna have fun with it or is just looks..??

 

its a little bit of both

 

Look at the camburg spindles that's what I run on my truck and it will give u 4" lift in the front... Are u gonna get coilovers too..??

 

x2 That'd be nasty! 4" spindles and adj. c/o's!!! If ya got the loot, do that otherwise like sandman said 285's. Don't forget that you might have alignment issues w/ your stock UCA's so ya might have to upgrade.

 

Yes zziirr.. thats what im running and i love it... your right about the alignment issues... U can max out the UCA at about 3" of lift but thats it... I had it like that and it rode like shit... Thats y i got the spindles and i could still use my stock UCA and Lower controls arms as well and they can take a beating ... But remember that if u do run 35" tires your gonna have to rear gear the truck or your gonna get shitty gas millage...

 

ok thanks yal help a lot looks like i need to get some more money befor i do anything

 

will 31x1050" fit under a stock truck?

 

Im pretty sure u could but there might be a slight rub only when at full crank coming up a driveway if anything but I'm pretty sure u should be striaght but I would still ask around to double check...

 

Yea... But isn't his 6 lug..?? Or am I trippin... Lol

 

yea it 6 lug