FS: Sway-A-Way Racerunner 2.5" Coilovers

I am selling my sway a way Racerunner 2.5" Coilovers with 8 inches of travel. They are fully adjustable 0-3". I just rebuilt them and was planning on running them on my 2001 Tacoma before Toyota found a big hole right by the catalytic converter. So now I am trying to get some money to help replace my frame or buy a new Tacoma. I just rebuilt these three weeks ago but haven't put the springs on them. Everything I have is pictured. I am willing to ship pretty much anywhere. Asking $500+shipping OBO. I can only upload one pic at a time. I dont know why, sorry about that.
Part number is SAW-56000-108.

 

Here's the second.

 

And the third pic that I took.

 

what length travel are they?

 

22.90" extended. 14.37" compressed

 

These are for stock or are they the 8 in coilovers for a lt kit

 

LT. I was planning on running them with a pair of upper control arms from all-pro off road.

 

whats the diference??

 

To tell you the truth I have no idea why a long travel Coilover wouldn't fit/work on a stock set up.

 

The stock setup is really only good for about 6" of shock travel. Going to 8 and you run more of the likely chance of binding the CV's. I know that can be limited with bumps and straps, but you better know the CV's limits if you do go that route. Of course this statement only applies to 4X4 2nd gens. GLWS OP. I have a set of SAW conversion shocks on mine and I love them.

 

I was wondering if there is any difference. The reason i ask is because i have saw racerunners on my truck now but everything else is stock they are the saw coilovers with the shaft ontop instead of on the bottome like these. So will the coilovers i have work for a long travel kit? As the measurments you pisted are for a 8in coilover which is whats called for on my lt kit

 

Yes it will work. No other retrofitting required like was on my 2nd gen. All you have to do is put the springs on. The stroke of the shocks is the sane but the mounting will obviously be different. From the pictures it appears you will have to attach top hats as well too.

 

These are 8" coil overs. They will not work with stock suspension. You'll ruin the shocks.

 

Anyone interested in just the hardware and spring? I want just the shocks

 

Here is a pic of the shafts.

 

Bump

 

These are still available if anyone is interested.

 

Bump

 

Interested. When you say LT, do you mean mid-travel? Uniball uca's and stock lowers? If so, then I am very interested. Can you check shipping to 83661? Thank you!

 

Pm'ed