Separate names with a comma.
Maxtrac spindles are 4" lift. Their advertised 6.5" kits are 4" spindles combined with 2.5" lift coilovers or top plate spacers. You won't be able...
Im thinking of running a 6.5" maxtrax lift kit and stackig a three inch level to make it a overall height of 9.5 inches. Has anyone done this and...
Thanks for your replies. It's good to hear from people with much more experience on this. I'll probably just go ahead and install the 5100's...
From AlabamaWX RADAR CHECK: A few showers and thunderstorms are over the Tennessee Valley of far North Alabama early this morning, otherwise the...
Falken A/T4
Also posted in the tire and wheel forum. Posting here as well for more traffic. I need to pick out new tires by tomorrow, truck is in the shop...
I need to pick out new tires by tomorrow, truck is in the shop for brake stuff and the tires are worn past roadworthy. Currently have Maxxis Razr...
All of these stories are good, but this one is fantastically priceless. I read large chunks of it to @mrs.turbodb and she laughed too. Made me...
4. NTS [ATTACH] Teapot-Hornet (1955, 4 kT) -- Wikipedia There’s almost nowhere else I’ve wanted to visit as much as this place -- over 900...
Installation: These are really straight forward to install. The harness itself has male/female plugs. Those will match the plugs on the top and...
They are adjustable but a three inch lift on our trucks looks perfect! I could have adjusted them down but it just didn’t make sense to crank...
I’ve got a similar load, OME Dakar medium duty has done well for me [ATTACH] I had three questions; what were the stock 3rd gen Tacoma leaf pack...
wow. thanks both for detailed info. Learn something new every day. So I think I'll do my best not to exceed payload. With that said: (1) I...
It depends on the leaf pack. Some are for carrying more load, some for lift, some for softer ride, and some for longer travel. In your use case,...
I may be interested in a swap for stage III’s! My stage II’s have ~60k on them though, so idk if you’d consider that a fair trade. They seem to be...
lol me too, I'm moving from III's to II's this year. I'll probably just put them on craigslist when I swap out. Even when fully loaded for long...
WTT: Anyone have a set of Deaver U402 stage II’s who wants to swap for stage III’s? I recently picked up a set of stage III’s and I guess I...
This bench is based on items I had for years before I moved out of my house: pressure treated 4x4s intended for a bench, and (2) 2x12 8 ft floor...
...about 50K miles, on and off road. I had them before the three inch lift. With the lift, I'm running the same size tire on a 17x9 -12 offset...
I have a three inch lift on my 18 Sport. With the stock wheels and 270/65/17 I needed spacers to clear the UCA's. I also did the cab mount chop....
Killer gear post. Will be referencing when we get back in the swing of truck life. ;)
Gear Roundup | What I Take With Me On Trips (2023 edition) December 31, 2023. Another year in the books. Unlike previous years, there weren't any...
Rig Review - First One in a Long Time Part of the A Bit More EMHT (Dec 2023) trip. December 28, 2023. It's been quite a while - eight months to...
I have a one inch diff drop and my skid fits perfectly. I also have a three inch lift.
I'll be trying method 1 tomorrow. It makes the most sense to me and if it doesn't work, I'm going to pull it outside, and light it on fire with...
Reads like a modern day reading of Job. Sorry for the extra expense Mark. You were about $700 to $900 dollars away from a new hot water heater...
why do you want to lift it?
That's my current setup. I have OME 886x front springs. I have added weight and I still find them to be a little stiff.
I’ve been thinking of doing a 3” lift. I was hoping to use some 5100 for that and a AAL in the rear. would this gain me three inches front and...
Good evening everyone, I have a question regarding my 2021 SR5 Tacoma: I am wanting to upgrade my current wheel and tire set up that I am running....
I’m 58 and will only use this truck as a dedicated fly fishing drift boat pulling rig. Gravel roads and boat ramps will be the most extreme....
About an inch. I left the rear at stock height and added enough lift to the front to take it almost level but left just a smidge of rake. And I'm...
*Location San Diego, CA* *Clean title* *No accidents whatsoever* The time has come to say goodbye to my 2015 DCLB 4x4 with Tow Package This is...
From AlabamaWX RADAR CHECK: Thankfully severe thunderstorms were a no-show for Alabama overnight, no watches, no warnings. Just wind and rain;...
One Dark Mile | Montana #4 Part of the Half a Trip in Montana (Oct 2023) trip. After climbing into our tents to escape the oncoming storm, wind...
No sorry, I've owned three 1st gens and they've all been 95-97 models haha. The 98-04 Dakars are way more common, I mean they fit a much larger...
To everyone, I am a total noob on truck modification and made a big mistake. I tried to install a larger tire on my OEM rims and failed. The...
Currently running a set of 265/70/17 KO2s on a set of 4Runner TRD Pro wheels. They're "ok" but looking to change it up a bit. I want to move up to...
The general rule of thumb with Toyota IFS is 2 to 2 and 1/2 in usually nets zero problems. After that you get into the fun department of geometry....
OK, I'm first going to apologize if this was answered somewhere in here, and I didn't see it. I have two questions. first, will a 3 inch lift...
Could have been titled what not to do. Long post, but it only took me a few minutes to type up. My 2012 tacoma frame was inspected last year and...
Remove the rubber-feeling cover. If not lifted, raise the front about three inches. I have a lift and don't have to remove nor turn the tires any....
any vehicle that's lifted more than i would say 2 inches will cause additional wear on components like cv boots. If your only concerned about the...
What brand did you go with?
So... my suggestion is to speak with Crikey Mike (see above, some one posted his contact info.) I used the heavy spring because I do sometimes...
Welcome to my backyard, looks like you found the goods. Next time I highly recommend driving the upper road into the Red Buttes, lots of good...
Smoke in the Siskiyous | Siskiyou Crest 1 Part of the Siskiyou Crest Adventure Trail (Aug 2023) trip. With much of our summer taken up with a...
Just look for a 2.5 to three inch Lift That is a very common lift height You will have $400 options and $4,000 Options Plenty to choose from