Alignment shop?

Anyone here a mechanic that does alignments or knows a shop in the NW valley that does good work and isn't going to tell me the numbers I want are impossible just because they don't want to spend the time to do it? Front is set at 1.75" and I'm looking to get as close to the following numbers as possible.

toe - 0
caster - 0
camber - 2-2.5

 

Network alignment. Its by like 7th street and thunderbird

 

I am sure you meant 2-2.5 caster, camber 0...yes?...

 

toe should be 1/16" toed in

 

Sorry, yes I got that backwards.

 

those numbers look really off. 1/16th toe in for sure, 6* of caster? maybe 1-1/2* camber.

2.5* camber will eat tires. I used to run that on a soloII car

 

Toe in isn't necessary. I've had toe set at 0 on other vehicles with success and so have a lot of other people on TW.

 

I wasn't paying attention and typed it backwards.

 

Anyone ever been to Gary's Wheel Alignment on 19th Ave and Deer Valley? They were recommended to me and all the reviews I could find are all positive. Everyone says he's old school and doesn't use the modern computers and has been doing it for decades. I guess I'll find out soon enough.

 

+1 on Network Alignment

 

I have firestones lifetime alignment for $150. worth it if you're going to keep the truck for a while. Or change out components of your suspension often. After 2 alignments it pays for itself.

 

I have had firestone lifetime alignment for about 6 years and have about 8-9 alignments for the original $125. They are hit or miss though, about average... Depends on the guy doing it

 

I've been a tech for 10 years, suspension specialist for Chrysler jeep dodge. I set my truxk.with .8 caster lead left, wi th wider tires I do 1.0-1.2 lead left to compensate for road crown. Camber just need to be equal and i keep it as close to zero as possible for trucks.the vipers indo more negative camber for better cornering.

 

I took it to Gary's Wheel Alignment this morning. Old guy knows his stuff and is super friendly. Numbers I got......

Toe, I went ahead and asked for 1/16" and he set it there
Camber .125 on both sides. He said he wanted to get to 0 but it hurt the caster numbers
Caster 2.1 Driver, 2.2 Passenger

This is just for 5100's set at 1.75. Steering wheel is dead nuts straight and it drives great. I'm happy with it.