Tacoma Skid Plates from Armor Tech Offroad!

Armor Tech Offroad is proud to offer these great skid plates that provide the best protection available for your Tacoma.

Skid plates below fit the 2005-current Tacoma

Lower Control Arm Skid Set This high strength skid plate is made from 1/4 inch thick high grade steel and meant to take a beating. It will provide a nice flat bottom skid pad for your Lower Control Arms and even includes counter sunk flat head screws to decrease drag when sliding on rocks and logs. This LCA Skid also wraps around the front of the frame to protect the LCA alignment adjustment nut and cam bolt. Installation is as simple as it gets, simply use the supplied stainless steel hardware to mount the skid plate through existing holes. Sold as a set of driver and passenger skids, $124.







Front HD Skid Plate: This skid plate covers from the front frame cross member all the way to behind the front differential. It is laser cut and CNC formed from high grade 1/4 inch thick American made steel. $266 regular price.





Transmission Skid Plate: This skid plate covers from the rear of the front skid plate to the transfer case cross member, providing excellent protection for your transmission. The transmission skid plate requires the ATO Front Skid Plate for mounting. It is laser cut and CNC formed from high grade 3/16 inch thick American made steel. $144.





Transfer Case Skid Plate: This skid plate covers from the front edge of the transfer case cross member to behind the transfer case. Included in the kit is a bolt on cross member to support the rear of the skid plate It is laser cut and CNC formed from high grade 3/16 inch thick American made steel. Does require relocating the stock exhaust crossover. $266 regular price.





Gas Tank Skid Plate for Access and Double Cab: This skid plate covers the vulnerable gas tank! It is laser cut and CNC formed from high grade 3/16 inch thick American made steel. The skid comes completely bolt on for trucks with the TRD package, and mounts using the factory hardware. Non TRD trucks can modify the stock gas tank straps or upgrade to the TRD straps. $189 regular price.

Skid plate kit: Get the Front HD Skid, Transmission Skid and T-Case skid plates and save 10% for a total of $629!

Full Skid Plate Kit: Get the Front HD Skid, Transmission Skid, T-Case Skid, and Gas Tank Skid and save 10% for a total of $798!

Order online at 4x Innovations' website by clicking the name of each item or call 1-608-348-5462 or PM me!

 

Sub'd

 

Any pics of the gas tank skid?

 

location those pics were taken look familiar

 

You can see the gas tank skid in the second photo for the Transmission skid plate. I'll be getting better photos of all of the skids soon.

And don't worry, The skid you receive will NOT have any surface rust on it!

 

On the site says the gas tank skid fits with the original hardware. Is that any trim package or would I need to get the TRD Offroad tank straps??

 

Brunes,

Good catch, thank you for pointing that out!

 

great product man however im not a big fan of the bolt heads facing down. all i see is them getting hemmed up on rocks and stuff, in the last picture you should take 2 inches more and wrap around the brace that attaches to the frame and bolt them inward instead of up. That would also lessen the chance of them breaking, just my thought.

 

Romeo,

Thank you for the comment. For the T-case skid I actually will do that. I was already planning to go button head screws for the Trans skid where it bolts to the t-case cross member.

 

What can I expect for shipping to 80526 for the $596 kit? And how long is turnaround time?
Approx how much is it to reroute the exhaust?

 

You can get it done at an exhaust shop for $175

 

Shipping for the IDS skid only to 21202? Combined shipping for fellow east coasters? Also, will this work with an ARB bumper? Thanks

 

I sent you a PM. I do not know the going rate for exhaust work. You'd be best off to take your truck to a couple of shops locally and get quotes.

The Front Skid mounts to the bottom of the front frame cross member. You shouldn't have any issues with an ARB. PM sent.

 

We've had a few requests for Aluminum front skids. We can do those now too! $389 for a front skid made from 1/4" 6061T6. They aren't on 4x I site yet so call if you'd like one. BTW the ATO site is almost done, just waiting on one more puzzle piece and it'll be live, and it has some GREAT features!

 

would love to see the finished product

 

any of these skids in stock for immediate shipping?

 

We are currently at 2-3 week lead time on skid plates.

 

Ordered a set! Can't wait to go smash em up! Going to be a few months though

 

Feel free to send/post updates or pics on my skids! I'm like a little kid right now, anxious as hell to get these babies. I'm not waiting a few months to go try them out either, I will go snow bashing and look for some big rocks!