Aftermarket speakers for Tacoma

Any body installed these: Polk Audio DXi690 in their front Tacoma DbC doors? ********* said thier brackets/spacers would work with any 6x9 with mounting depth of 3 1/4". These are 3 3/16. Pretty close for comfort. also looking at the Boston Acoustics SC95 which would def. fit. Any opinions on these two speakers? I have a Pioneer AVH-P2400BT HU. No amp. Also, if I use three way speaks up front, should i still connect the tweeters that are in there already? Thanks for any advice,

Stan

 

3-3/16" is less than 3-1/4" so they will fit.
If you're concerned, get some 1/4" weatherstripping and stick it around the opening on the adapter to move the cone out so it'll only be 3-1/16" after the weatherstripping compresses.

I'm running a Polk DB6501 component system and it fits perfectly (but it's only 2-5/16" deep). Keep in mind that the TT adapters will give you about 3/4" more than factory.

I mounted my crossover under the armrest.

 

Yeah i know 3 3/16 is a 1/16 less than 3 1/4 just thought it might be too close for comfort...who knows what kind of tolerances these guys hold. Just ordered the adapters, just have to decide on some 6x9's. Any opinions?

Stan

 

I was planning on using those same speakers. I would love to hear about what you pick.

I would also like to hear about if you need to reconnect the tweeters because the DXi690 have them in the speaker. I thought about replacing the 6x9 with the DXi690 and then some polk tweeters as well, but I am unsure if it would mess anything up.

 

Yes, that is part of my dilema. I know everyone has an opinion on speaks but was hoping someone had some experience with either of these.