Well it was pretty nice out here today so i put about 8 hours in on my install, I still had daylight left but it started to rain pretty good so I called it quits. Looks like rain the next few days so it may sit this way for a while, thankfully I have a second car to drive.
I took out the rear seats and all the neccesary trim pieces, I probably could have worked around some of it but it was much better with it out. I got the power, RCA, and speaker wires all run. The biggest PIA was running the speaker wires through the door boots, I found an easy way to do it though however I was on door #4. Installed the raam mat on the inside door skins. Soldered up my HU harness with the ASWC-1 and the parking brake bypass and tested it all out. To my surprise the ASWC only took about 30 seconds to auto program and the controls work perfectly. Very happy about that as I have read some horror stories about that thing.
Not much room to run anything back there but I got it done with the help of a bendy stick.
The stick! Its actually a piece of one of those reflectors you line your driveway with so the plow guy doesn't dig up your lawn.
Raamat installed on inside door skins and back wall. Once I get speakers in I will seal the doors with the mat and then cover with the ensolite. I bought some roof flashing and will seal the big holes in the door before I put the mat over everything. It is kind of an extra step but as long as everything is ripped apart I figure it wont hurt to try and seal the doors up as much as possible. The raamat seems like a really nice product and is easy to work with.
The stock speakers and there laughable magnets, they need an enhancement product! It really is laughable. How can the magnet on the tweeter be bigger than the 6x9's?
Hoping the weather holds off tomorrow so I can get some more done. I'm thinking another 6 hours or so and it will be all finished. I am going to run that Xplod speaker for a bit but will probably want to get a new one. I asked earlier for reccomendations, so anyone got any? 400 watt rms, .85 cubic foot box with a 5" mounting depth. I was thinkin a image dynamics ID 10 but I think it mounts too deep.
More pictures when i'm done. Anyone doing a similar setup with questions feel free to ask, i'm not a pro or anything but have done quite a few stereos.