amp-subwoofer help

tcboss · 09-03-2007, 10:44 AM

yesterday i tried installing by jbl amp into my stock deck in my tacoma. i couldnt find any of the spots to plug in my amp? is it possible to even hook up the amp to a stock unit? or do i need to put my alpine deck in there from my other truck?

dylokjai · 09-07-2007, 08:43 AM

you will need to go buy a LOW INPUT CONVERTER to install any amps to your stock headunit

Soul · 09-20-2007, 05:48 PM

Quote:

Originally Posted by dylokjai

you will need to go buy a LOW INPUT CONVERTER to install any amps to your stock headunit

Correction you "could need". If your amp has a speaker-level input(S), Ur fine. Just splice a speaker wire and connect it

Jesse · 09-30-2007, 09:08 AM

Soul is correct. If you want to save money and have a cleaner install, look for an amplifier that comes with high level inputs. That way you can splice into the factory speaker outputs and connect to the amp. If your amp doesnt have this, you will need to purchase the high to low level converters which takes more time and usually gives you more noise problems. Personally, I prefer to replace the factory radio. Makes everything alot easier and sounds 100% better. If you are on a budget than the converter is right for you.

09-03-2007, 10:44 AM	#1
tcboss Member Joined: Dec 2006, #527 Location: Seattle Washington Posts: 73 - 07 BLACK ACCESS SR5 DEBADGED - 2007 Access Cab Automatic V6 6 CYLINDER 3 in. Revtek Lift, 33 in. M/T Open Country's, Blacked Out Tail Lights, Black Out Tailgate Emblems, Debadged Passenger and Driver Side, 2 12 inch. MTX's, JBL 750 Watt Amp, Blue Neon's Inside Truck, 15 % Tint	amp-subwoofer help yesterday i tried installing by jbl amp into my stock deck in my tacoma. i couldnt find any of the spots to plug in my amp? is it possible to even hook up the amp to a stock unit? or do i need to put my alpine deck in there from my other truck? __________________ 07 Black Access Cab, 3 in. Revtek, 33 in. Open Country M/T, 18 in. Chrome Goliaths, Blacked Out Tail Lights, Blacked Out Emblems, Debadged Sides, Interior Neon Lighting (Blue), 15 % Tint

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
AccessCab Subwoofer(s)	007Tacoma	Audio & Video	36	04-19-2008 09:25 PM
Infinity Basslink 10" 200watt Powered Subwoofer For Sale!!	MotoXFreeStyle61	Buy / Sell / Trade	11	11-08-2007 04:14 AM
Pic of JBL subwoofer	ScottTRD	Audio & Video	0	10-01-2007 11:16 AM

09-07-2007, 08:43 AM	#2
dylokjai Junior Member Joined: May 2007, #1703 Posts: 15	you will need to go buy a LOW INPUT CONVERTER to install any amps to your stock headunit

09-30-2007, 09:08 AM	#4
Jesse Member Joined: Oct 2006, #82 Posts: 83	Soul is correct. If you want to save money and have a cleaner install, look for an amplifier that comes with high level inputs. That way you can splice into the factory speaker outputs and connect to the amp. If your amp doesnt have this, you will need to purchase the high to low level converters which takes more time and usually gives you more noise problems. Personally, I prefer to replace the factory radio. Makes everything alot easier and sounds 100% better. If you are on a budget than the converter is right for you.