Amping components with internal crossovers ?

I'm trying to amp my front speakers just to see the difference before buying amps and doing the full install, however I can't figure out where to run the wires from the amplifier to the speaker.

I'm running these:

Alpine Type-S SPS-600C - Car speaker - 80 Watt - 2-way - component

http://www.amazon.com/Alpine-SPS-600C-Component-Speaker-System/dp/B001447Z8Q

All four posts on the back of the speaker are being used, two for the tweeter positive/negative and two for the speaker positive/negative.

Now, there are two wires that were capped off that I'm thinking is where the wires fo the amp should go to power the speakers. It looks like this:

It's the blue and green wires. They had caps, but I cut them off to see what I was working with.
Here's a few more:


Are those the right wires, or do I need to splice and solder into something else ? Thanks!

 

Problem solved. No input needed.