.

.

 

At the very least you will have to deaden the doors you mount them in.

 

you can fit a shallow mount ten behind the drivers side of the bench. and i can move the bench all the way back.

 

Hey if you don't want to rock a subwoofer and I assume your a 2nd gen correct? Then check out ItalynStylion's thread. I would link the thread but im on my phone but u can just search his username and find it.

 

I have a pioneer 10" shallow behind the bench seat, and I can slide the seat all the way back too

 

Ok cool. But just remember whatever route you choose if you don't deaden the doors properly its probably gonna rattle like a mother!!

 

MTX has the thunder thins, like epa4wd he has pioneer, i used to have a clarion shallow ten but i blew that one with a 1200w amp. I have all Kenwood in my truck. the Sub woofer is a Excelon shallow ten. Look around this site, its where i buy my stuff all the time. www.onlinecarstereo.com. i had 6x9s acting as subs in my old volvo 940 before i got my tacoma and it isn't the same quality as a 10' sub.