These sliders are top quality bolt on rock sliders that can take the abuse of actually sliding over rocks. They offer a few features other sliders don't. They come in 3 widths. Narrow, medium and wide. They have a optional rear kick up (bed side protection) that works on the access cab but not the 4 door since the rear door on that model doesn't open backward. They have the outer legs out far toward the ends, a rear mount that protects the leaf spring mount on the frame, and a hardware kit that is much more than simple nuts and bolts.
This unique mounting kit is designed to clamp down onto the frame and allow the 1/2" fine thread bolts to safely mount through the large square holes on the side of the frame.
Also available for DCLB (double cab long bed with 6' bed)
Other slider related items:
2005-2013 ACLB & DCSB Tacoma Bolt On Sliders
1-3/4" x .120 welded tube / other material available for additional cost.
1/4" frame plates.
1/4" gussets on legs.
All seams face upward.
Rear leg uses unique slider foot-mount to protect leaf hanger on frame.
Requires drilling 4 holes on bottom of each frame rail. Nut plates with 1/2" coated fine thread grade 8 hardware.
Special high nuts on nut plates to ensure room for weld and wrench.
Front 4 plates use handles and don't require a wrench since they rotate until they hit the frame wall.
Hardware comes pre-antisiezed.
Options below require additional charge
BSP (bed side protection) ACLB only.
Fill plates with or w/o dimple die holes.
Can be paid when sliders are finished.
Calculated by zipcode.
Can be done on streetacos.com
Forum PM or email firstname.lastname@example.org