Ghost96Romeo's Build

Ghost96Romeo · 01-01-2009, 07:04 PM

I decided to start this thread because it seems like I'm always adding things to this truck, and it makes no sense to continue starting a new thread for a new picture to add.

I wanted a very practical build with a modest budget, and what you see here is the result. Everything was installed or built by me with everyday tools that most people have in their garage.

Enjoy....

The day I bought her

. 2006 Double cab TRD-Offroad Pre-Runner (yes 2wd).

I immediately knew I wanted to add a brush guard, not a cheapo bull bar (sorry bullbar guys

), so I did some searching and came across this. I mounted KC 385,000 candlepower Hilites Daylighters and wired them directly to the battery so I could have them on without the headlights.

Well it turns out that the original black plastic KC covers started melting when I left them on. So I took them back to the shop and swapped them out for the wire mesh covers. Then came the dilemma of choosing whether or not I wanted to keep the headlight guards on or not

.

I eventually decided to keep the entire guard together, and installed a 3" suspension lift with an AAl in the rear made by ProComp. Sorry no pics of that install, but here's the after picture.

I was worried about someone stealing my spare, so after looking at it for about 2 minutes I decided that I could make a suitable and simple deterrent.

I've been pissed since I bought the truck that an Auxiliary Input wasn't available to connect my Zune

, so I found this forum and bought a Metra I-pod adapter from Circuit City. I pulled the center console out and routed the wiring to the center armrest through the net retainer clips. Now I'm happy with the sound as opposed to the crappy FM transmitter I was using.

The next item on my wish list was to have a bedcover that was able to rollup so I could still transport my bike when I needed too.

I decided to buy the LUND Genesis Roll Top from BassPro Shops online and I really was impressed. I didn't know that you lose the ability to use all of your rail tie-downs. To fix that, I drilled some closed loop eye bolts into the bedcovers rails and it works great.

The latch from underneath.

My Christmas presents included some 1.5" Spidertrax wheel spacers so I installed them Christmas night and they were a breeze to install. No More Tire Rubbing!!!!!!

Yeah, the truck is filthy from the deer lease.

Now comes the interesting part that I hope most of you will enjoy as much as I do.

I decided to build some custom rock sliders/steps................bolt-on.

I needed to make use of what I had, which was essentially an ancient stick welder, metal band saw, and a 4.5" grinding wheel. Easy right? I’ll let you decide. I’ve got to thank my Dad the most for being a great sport and putting up with my……choices…. of how to build them. I couldn’t of done it without him helping me on those nights.

Yep, that was the welder.

I bought 40 feet of 2x3 rectangular tubing that was 11 gauge (1/4" thick) and had the steel company cut them into easier to manage 10 foot sections. I also purchased 4 feet of 1/4"x6" flat steel for the base plates, and 1 1/2" X 1/4" flat steel.

Once I had the primary cuts done, I mocked up the primary pipe under the rockers and took the measurements for the pipes to the base plates and welded them together.

Once these were done, I needed to cut the right angle and length for the risers for the second pipe. Not an easy task, but my dad and I cut a model out of wood to use as a guide, and we were able to cut great risers out of the remaining steel.

After mocking up the pipes again, I decided to cut the bottom pipes at 45's to aide in the sliding function if necessary. The blunt pipes just didn't seem to help in that category if needed. It also looks great with outside pipes already being angle cut. Once that was finished, I welded on the end caps for the 4 pipes and started grinding the welds smooth. I like camo....

Now that those are done, I wanted nothing less than to have them coated in durable spray-on bed liner.

So I grinded everything down to bare metal and took them in to get sprayed with Line-X.

Now that they are done, I just need to cut the.....ahem....."tits" off with a razor and all will be good. These pictures really don't do the bedliner justice. I took these pictures right after they got back, so they're really shiny. These puppies are STOUT!
I'll post more of the pics when I actually get to finish bolting them up once I'm off. Hope you guys enjoy it.

duckcmdr · 01-01-2009, 07:22 PM

Looks good ghost. I just ran my metra like that i'm thinking of putting a powerpoint in the center console so it can charge in there too.

Nice job on the sliders.

derekabraham · 01-01-2009, 07:27 PM

Looking good!

PackerfanXD · 01-01-2009, 07:56 PM

Nice!

tacomaman06 · 01-01-2009, 08:11 PM

great looking truck man!! those sliders are pretty badass too!! great job!!

neontrail · 01-01-2009, 08:13 PM

very nice!! Great post

09tacoLI · 01-01-2009, 08:26 PM

nice work on the sliders looks like it took alot of work and in the cold too.

longbow · 01-04-2009, 11:01 AM

Nice build, and nice looking ride.

luk8272 · 01-04-2009, 11:25 AM

Good job looks good

silver07taco · 01-04-2009, 11:41 AM

Nice build, I like the sliders nice work.

neslerrah · 01-04-2009, 11:43 AM

Definitely custom built. Great job. Truck looks great!

Ghost96Romeo · 01-08-2009, 08:46 PM

Thanks for all the compliments guys, the sliders will be bolted on this weekend!

LonghornTaco · 01-08-2009, 09:01 PM

Very nice Ghost! Gotta feel good when you make your own parts! If I had access to a welder and knew how to use it, I would have made some for mine...

Ghost96Romeo · 01-08-2009, 09:07 PM

Care for a set?

LonghornTaco · 01-08-2009, 09:08 PM

Quote:

Originally Posted by Ghost96Romeo

Care for a set?

Got some already. But, if I fubar these, I'll keep you in mind...

duckcmdr · 01-09-2009, 04:50 AM

hey ghost you intrested in selling a set? price? those look low profile when you had them set with the jack stands.

Delmarva · 01-09-2009, 05:13 AM

Sliders look awesome!

dud122 · 01-09-2009, 05:18 AM

be careful offering those... with how those turned out you may find yourself with more orders than you can fill......

how much for a pair for a 1st gen double cab?

Ghost96Romeo · 01-09-2009, 03:20 PM

Quote:

Originally Posted by duckcmdr

hey ghost you intrested in selling a set? price? those look low profile when you had them set with the jack stands.

I should rephrase that.. what I was implying was that I could help Jason build them, but I don't plan on building some to sell and ship out.

Quote:

Originally Posted by dud122

how much for a pair for a 1st gen double cab?

Sorry, I'm all for giving a helping hand, but I just built these in my garage using my truck as the model and I don't know of any other 1st gens.

Ghost96Romeo · 01-12-2009, 09:42 PM

Sorry it took so long TW fans, but here's the photo's after I installed the sliders this weekend.

Prepping for the bolts

Installed and view of the bolts from the rear

Checked the distance from the rockers and ensured that my measurements were correct and they are even with the outside edges of the tires. A simple "plum line" wrapped around the tires shows that they are even.

Now for the action photos from taking her out! It was alot drier than I thought it would be.

And there you have it. Sliders installed and bolted on.

01-01-2009, 07:04 PM	#1
Ghost96Romeo What is the Search Tab for???? Joined: Oct 2008, #10228 Location: Kyle, TX Age: 27 Gender: Male Posts: 2,067 06 TRD Off-Road D-Cab 2006 Double Cab Automatic 4.0 3" Pro-Comp Suspension Lift AAL Rear w/TSB, Brush-Guard w/ KC Daylighters, Lund Genesis Roll-top Bed cover, K&N Filters, Spidertrax Wheel spacers, Built-by-Me Rock Sliders, Jeep Tow-Hook, Black Leather seats, 48"Hi-Lift Jack mounted in the bed, Blacked out TRD Rims, BHLM, FLM.	Ghost96Romeo's Build I decided to start this thread because it seems like I'm always adding things to this truck, and it makes no sense to continue starting a new thread for a new picture to add. I wanted a very practical build with a modest budget, and what you see here is the result. Everything was installed or built by me with everyday tools that most people have in their garage. Enjoy.... The day I bought her. 2006 Double cab TRD-Offroad Pre-Runner (yes 2wd). I immediately knew I wanted to add a brush guard, not a cheapo bull bar (sorry bullbar guys), so I did some searching and came across this. I mounted KC 385,000 candlepower Hilites Daylighters and wired them directly to the battery so I could have them on without the headlights. Well it turns out that the original black plastic KC covers started melting when I left them on. So I took them back to the shop and swapped them out for the wire mesh covers. Then came the dilemma of choosing whether or not I wanted to keep the headlight guards on or not . I eventually decided to keep the entire guard together, and installed a 3" suspension lift with an AAl in the rear made by ProComp. Sorry no pics of that install, but here's the after picture. I was worried about someone stealing my spare, so after looking at it for about 2 minutes I decided that I could make a suitable and simple deterrent. I've been pissed since I bought the truck that an Auxiliary Input wasn't available to connect my Zune, so I found this forum and bought a Metra I-pod adapter from Circuit City. I pulled the center console out and routed the wiring to the center armrest through the net retainer clips. Now I'm happy with the sound as opposed to the crappy FM transmitter I was using. The next item on my wish list was to have a bedcover that was able to rollup so I could still transport my bike when I needed too. I decided to buy the LUND Genesis Roll Top from BassPro Shops online and I really was impressed. I didn't know that you lose the ability to use all of your rail tie-downs. To fix that, I drilled some closed loop eye bolts into the bedcovers rails and it works great. The latch from underneath. My Christmas presents included some 1.5" Spidertrax wheel spacers so I installed them Christmas night and they were a breeze to install. No More Tire Rubbing!!!!!! Yeah, the truck is filthy from the deer lease. Now comes the interesting part that I hope most of you will enjoy as much as I do. I decided to build some custom rock sliders/steps................bolt-on. I needed to make use of what I had, which was essentially an ancient stick welder, metal band saw, and a 4.5" grinding wheel. Easy right? I’ll let you decide. I’ve got to thank my Dad the most for being a great sport and putting up with my……choices…. of how to build them. I couldn’t of done it without him helping me on those nights. Yep, that was the welder. I bought 40 feet of 2x3 rectangular tubing that was 11 gauge (1/4" thick) and had the steel company cut them into easier to manage 10 foot sections. I also purchased 4 feet of 1/4"x6" flat steel for the base plates, and 1 1/2" X 1/4" flat steel. Once I had the primary cuts done, I mocked up the primary pipe under the rockers and took the measurements for the pipes to the base plates and welded them together. Once these were done, I needed to cut the right angle and length for the risers for the second pipe. Not an easy task, but my dad and I cut a model out of wood to use as a guide, and we were able to cut great risers out of the remaining steel. After mocking up the pipes again, I decided to cut the bottom pipes at 45's to aide in the sliding function if necessary. The blunt pipes just didn't seem to help in that category if needed. It also looks great with outside pipes already being angle cut. Once that was finished, I welded on the end caps for the 4 pipes and started grinding the welds smooth. I like camo.... Now that those are done, I wanted nothing less than to have them coated in durable spray-on bed liner. So I grinded everything down to bare metal and took them in to get sprayed with Line-X. Now that they are done, I just need to cut the.....ahem....."tits" off with a razor and all will be good. These pictures really don't do the bedliner justice. I took these pictures right after they got back, so they're really shiny. These puppies are STOUT! I'll post more of the pics when I actually get to finish bolting them up once I'm off. Hope you guys enjoy it. __________________ *My "DIY" Build* http://www.tacomaworld.com/forum/bui...eos-build.html

01-01-2009, 07:56 PM	#4
PackerfanXD Just waiting for the Apocalypse Name: Mr. Mom Joined: Aug 2008, #8741 Location: Armed In A GUN-FREE Zone Age: 36 Gender: Male Posts: 3,675 Killer Blue Taco 2007 Double Cab Automatic 4.0 V6 Bilstein 5100's, OME 885's, Total Chaos UCAs, Rear Leaf Spring TSB, Toytec AALs, Moto Metal 950 16" Wheels, BFG 285/75R 16 AT Tires, TRD Exhaust, Viper Alarm, Fog Light Mod, De-badged, Blue LED Dome Light, EZ Clamped Tailgate, Wet Okoles, Satoshi Grill, 5% Tint, Engine Tick Fix, Black Bumper, Black Center Valence, Thanks for all the help chris4x4!	Nice! __________________ Μολὼν λάβε!!! *"From my cold, dead hands!"* I was Anti-Obama when Anti-Obama wasn't cool. (<I also had this in my sig before it was cool)

01-01-2009, 08:11 PM	#5
tacomaman06 Carolina Alliance: Redneck Division Name: Will Joined: May 2007, #1475 Location: York,South Carolina Age: 30 Gender: Male Posts: 22,197 04 trd tacoma 4x4 v6 double cab 2004 Double Cab Automatic 3.4 v6 vent visors,deck plate mod, gray wire mod, black steelies and emblems, mag-lite mod, wheelers/ome suspension, stainless brake lines,blacked out bumpers(bedliner),dynomax super turbo muffler,cabelas mossy oak seat covers ans camo steering wheel cover,brush guard, hella 500(x4)custom built(by me) hitch hauler),budbuilt skids,revenge-fab sliders,inchworm locker skid,cobra cb,wilson 3 ft antenna,hi-lift jack(tool box mounted) painted stock wheels....still to come.... afe pro dry s filter..........plus many,many more!!	great looking truck man!! those sliders are pretty badass too!! great job!! __________________ i am WILL--my ride=04 tacoma trd 4x4 double cab, v6, auto,deck plate mod, grey wire mod, billy 5100's all the way around,black low-pro uws toolbox, black steelies,blacked out emblems, mag light mod,wheelers/alcan springs, ome 881 coils, braided stainless brake lines, polyurethane bushings,dynomax super turbo/slash cut tip-blacked out,chrome deleted bumpers via herculiner bed liner,color matched bedlinered tailgate, camo seat covers,sockmonkey decals,husky floor liners, hunter brush guard, 4 hella 500's(2 spotlight/2fog light),budbuilt skid plates,inchworm e-locker skid,revenge-fab sliders,cobra cb/loudspeaker PA, pioneer headunit/infinity reference components/2ways......plenty more still to come!!! http://s202.photobucket.com/albums/aa269/tacomaman06/ signature by piercedtiger www.myspace.com/goodolboy1979

01-01-2009, 08:13 PM	#6
neontrail Happy Holidays TW Name: geoff Joined: Apr 2008, #5844 Location: ☆\Texas/☆ Age: 35 Gender: Male Posts: 6,176 08 SUPERWHITE DblCab Prerunner SR5 2008 Double Cab Automatic V6 TW decal, Shorty antenna, Seat belt ding mod, De-badged, Tint 20%, Blue 48 LED dome-light, Custom Devil horns, yellow fogs(Lamin-X), sockmonkey decal, Suspension TSB, tailgate theft deterent device.....	very nice!! Great post __________________ X-MAS GIFT EXCHANGE \|the LIST\|TacomaWorld MINI CITY\|

01-04-2009, 11:01 AM	#8
longbow Bullet with a name on it Name: Bill Joined: Jun 2008, #7586 Location: Indiana Gender: Male Posts: 5,159 05 Tacoma Silver Mica TRD 4 Door 2005 Double Cab Automatic 6 squirrels and a pissed cat Toy-tec Coil over lift, Eibach 700 lb springs, Sway bar relocate, Total Chaos UCA's, Moto metal wheels, BFG mudterrians, HID, custom 3 piece grill, Highlift jack w/custom mount, Highlift jack cover, bed matt, de-badged 100%, storage box lock mod, using defrost w/o AC mod, short antenna mod, horn re-locate, Tire Gate flat spare tire mount, engine cover painted, bed light (1) mod, wreck bar carrier, Blue Sea 5026 fuse block, center console outlet, flash light mod, Blue Sea inline fuse, Shrockworks sliders, All-Pro front bumper, Piaa 510 driving lights, Warn shackles front, Kennesaw rear bumper, "Tag Boltz" plate lights, Warn shackles rear, Warn M8000 winch, devil horns, BHLM, weathech liners front and rear.....T.W. sticker of course. Custom Sock bed decal for Michele	Nice build, and nice looking ride. __________________ "Never lay down, Never say die, Never tap out" Sig. by cmack48

01-01-2009, 08:26 PM	#7
09tacoLI Senior Member Joined: Nov 2008, #10817 Location: long island ny Age: 32 Gender: Guy Posts: 569 09 off road 2009 Double Cab Automatic trd exhaust,roof rack, Fronts tinted, Shrockworks sliders,Toytec Ult. 3in with 275/70/16 BFG A/Ts,Total Chaos UCAs	nice work on the sliders looks like it took alot of work and in the cold too.

01-04-2009, 11:25 AM	#9
luk8272 My 2 kids Name: Lucas Joined: Feb 2008, #4929 Location: Kaplan, Louisiana Age: 27 Gender: Guy Posts: 3,748 07 Silver4dr. 4x4, V6 Shortbed 2007 Double Cab Automatic 4.0 5% Tint, Bug flector, vent Visors, Removed secondary air filter, Rear Spring TSB w/ Bilstein shocks, Toytec 3" lift, Debadged, Billet Grille, 17x9 Pro comp 6001 rims, BFG 285/70/17, Fog light anytime mod, Tailgate hose clamp mod, Prodry AFE filter. Extended Differential Breather, ABS on/off, 6000k HID heads/fogs, ScanguageII, Devil horns, Devil horns on third brake light, Mounted 60" Highlift, Mounted Tool Box, Wet Okole Front Seat Covers, TW sticker, Midland Handheld CB,Painted engine cover, Revenge Fab Sliders Painted in shed. Bed Cover or Cap? and Exhaust!	Good job looks good __________________ Arkansas Superlift Park 4/10/09 Big Easley Run 5/17/09 Windrock Coal Creek OHV 6/20/09 Louisiana members

01-04-2009, 11:41 AM	#10
silver07taco Cant fix broke! Name: COIL Joined: Apr 2008, #6241 Location: Maryland Age: 21 Gender: Male Posts: 2,908 07 tacoma 4x4 sport 2007 Access Cab Automatic 4.0 v6 Toytec coilovers,AAL,ARB rear air locker,ARB mini compressor,Allpro armor,Kennesaw Mountain rear bumper,Milemarker Winch,HiLift,Cooper tires, Helo wheels,Autometer gauges,K@N Intake, Magnaflow exhaust,Total chaos LCA skids,Custom switch panel,Piaa headlight bulbs,Blue sea fuse block and inline fuse block,Pilot lights,Westin lights,cobra CB,48'' Firestick,Timbren bump stops,DEEZEE in bed tool box,viair onboard air,Custom bed rack,In cab winch controller.	Nice build, I like the sliders nice work. __________________ ^Sig by Delmarva^ 2007 TRD Sport 4X4,Grill craft Toytec coilovers,AAL,Icon shocks,U-Bolt flip kit,ARB rear air locker,ARB mini compressor,Allpro skids and sliders,Kennesaw Mountain bumper(F,R),Milemarker Winch,Viking winch line,Cooper tires, Helo wheels,Autometer gauges,K@N Intake, Magnaflow exhaust,Total chaos LCA skids,Piaa headlight bulbs,Blue sea fuse block and inline fuse block,cobra CB,48'' Firestick,Timbren bump stops(F/R),DEEZEE in bed tool box,viair onboard air,In cab winch controller. JANUARY 09 TOTM http://www.tacomaworld.com/forum/bui...cos-build.html<<<<< My Build

01-04-2009, 11:43 AM	#11
neslerrah Bear Down! Name: Harrelsen Joined: Feb 2008, #4803 Location: Tucson, Arizona Age: 22 Gender: Male Posts: 4,201 '06 5 Lug, Reg. Cab, 2WD 2006 Regular Cab Manual 2.7L/I4 Secondary air filter removed, elbow mod, aFe Pro Dry S, BF Goodrich All Terrain TA KOs (31x10.5R15), American Racing Mojaves, Debadged, BHLM, Dome Light MOD (Blue), Scanguage II, Hella 500 behind Satoshi Grille, Bed Lights, Pioneer DEH-P6000UB and Speakers TS-G1642R, Sockmonkey Decals, Readylift 5-lug SST, Rear Shocks - Pro Comp P/N324515, Dynomax Super Turbo #17748	Definitely custom built. Great job. Truck looks great! __________________ My 5-lug build

01-08-2009, 08:46 PM	#12
Ghost96Romeo What is the Search Tab for???? Joined: Oct 2008, #10228 Location: Kyle, TX Age: 27 Gender: Male Posts: 2,067 06 TRD Off-Road D-Cab 2006 Double Cab Automatic 4.0 3" Pro-Comp Suspension Lift AAL Rear w/TSB, Brush-Guard w/ KC Daylighters, Lund Genesis Roll-top Bed cover, K&N Filters, Spidertrax Wheel spacers, Built-by-Me Rock Sliders, Jeep Tow-Hook, Black Leather seats, 48"Hi-Lift Jack mounted in the bed, Blacked out TRD Rims, BHLM, FLM.	Thanks for all the compliments guys, the sliders will be bolted on this weekend! __________________ *My "DIY" Build* http://www.tacomaworld.com/forum/bui...eos-build.html

01-08-2009, 09:01 PM	#13
LonghornTaco Can you pass the bailout please? Name: Jason Joined: Oct 2008, #9763 Location: Minnesota Age: 33 Gender: Male Posts: 3,528 Black 09 4x4 TRD Off Road Doublecab 2009 Double Cab Automatic V6 3" ToyTec coilover lift on Bilstein 5100s, Total Chaos UCAs, ToyTec diff drop, Scangauge II, 4D MagLite mounted on the drivers seat, Painted engine cover, Painted calipers (red), Painted skid plate (red) Valentine 1 radar detector hard wired, Damplifier Pro on the floor, back wall and doors, Luxury Liner Pro on the floor and doors, Kenwood DNX8120, 2 Pioneer TS-SW1041D 10" shallow mount subs, 2 Pioneer PRS-D4200F 1200W amps, Mr Marv sub enclosure, Hybrid Audio Clarus 6.5" components in the front doors, Alpine 5.25" coaxials in the rear doors, A.R.E. LSII fiberglass tonneau cover, All Pro bumper, All Pro sliders, Wet Okole seat covers, Sockmonkey Mountain badges, PIAA 510 SMR Driving Lights, Warn M8000 Winch, Bud Built skids	Very nice Ghost! Gotta feel good when you make your own parts! If I had access to a welder and knew how to use it, I would have made some for mine... __________________ Texas style is no trifling, trendy thing. It is that which you would remove from Texas in order to make it Oklahoma. March TOTM My Build

01-08-2009, 09:07 PM	#14
Ghost96Romeo What is the Search Tab for???? Joined: Oct 2008, #10228 Location: Kyle, TX Age: 27 Gender: Male Posts: 2,067 06 TRD Off-Road D-Cab 2006 Double Cab Automatic 4.0 3" Pro-Comp Suspension Lift AAL Rear w/TSB, Brush-Guard w/ KC Daylighters, Lund Genesis Roll-top Bed cover, K&N Filters, Spidertrax Wheel spacers, Built-by-Me Rock Sliders, Jeep Tow-Hook, Black Leather seats, 48"Hi-Lift Jack mounted in the bed, Blacked out TRD Rims, BHLM, FLM.	Care for a set? __________________ *My "DIY" Build* http://www.tacomaworld.com/forum/bui...eos-build.html

01-09-2009, 05:13 AM	#17
Delmarva Evolution Name: Lord Rupert Everton Joined: Oct 2008, #10148 Location: Eastern Shore of MD Gender: Guy Posts: 15,946 07 Silverado LTZ 4x4 Automatic	Sliders look awesome! __________________ FS: FJ SE Anthracite Wheels (Set of 5) FS: OME Rear Shocks & Gentex Autodim / Homelink Mirror

01-09-2009, 05:18 AM	#18
dud122 rabble rabble rabble Joined: Nov 2008, #10566 Location: Baltimore, MD Age: 24 Gender: Male Posts: 1,458 02 TRD DC 4x4 SR5 2002 Double Cab Automatic 3.4l V6 Deck Plate'd, Grey Wire'd, AFE Pro Dry S Drop'd, Rockers Herc'd, Tails Tint'd	be careful offering those... with how those turned out you may find yourself with more orders than you can fill...... how much for a pair for a 1st gen double cab?

01-12-2009, 09:42 PM	#20
Ghost96Romeo What is the Search Tab for???? Joined: Oct 2008, #10228 Location: Kyle, TX Age: 27 Gender: Male Posts: 2,067 06 TRD Off-Road D-Cab 2006 Double Cab Automatic 4.0 3" Pro-Comp Suspension Lift AAL Rear w/TSB, Brush-Guard w/ KC Daylighters, Lund Genesis Roll-top Bed cover, K&N Filters, Spidertrax Wheel spacers, Built-by-Me Rock Sliders, Jeep Tow-Hook, Black Leather seats, 48"Hi-Lift Jack mounted in the bed, Blacked out TRD Rims, BHLM, FLM.	As promised.... Sorry it took so long TW fans, but here's the photo's after I installed the sliders this weekend. Prepping for the bolts Installed and view of the bolts from the rear Checked the distance from the rockers and ensured that my measurements were correct and they are even with the outside edges of the tires. A simple "plum line" wrapped around the tires shows that they are even. Now for the action photos from taking her out! It was alot drier than I thought it would be. And there you have it. Sliders installed and bolted on. __________________ *My "DIY" Build* http://www.tacomaworld.com/forum/bui...eos-build.html

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
silver07taco's build	silver07taco	Builds	847	11-15-2009 05:38 PM
My New Build	1998coma	Street Trucks	22	02-20-2009 11:22 AM
Scott's build	Ascott7555	Builds	7	01-12-2009 01:56 AM
SHunter080703's Build	SHunter080703	Builds	34	12-05-2008 06:43 AM
build it or not	madmat	1st Gen. Tacomas	10	06-13-2008 07:55 AM