Designed up some 3rd brake light vinyl decal overlays for those looking to spruce things up. Tested and fitted to fit the 2005-1013 model lights.
I can design custom, so PM me if interested.
$15/pair shipped. $5 bucks extra if there is design work involved.
One extra decal will be sent along because I know how important it is to have extras on hand
INSTALLATION INSTRUCTIONS (in a nutshell) :
-If you have a spray bottle, put one drop of liquid dish soap in there with the rest water, and shake it up lightly.
-Clean the light and make sure all the dirt and dust is gone from anywhere around it too.
-Once clean, spray a bunch of the solution on the light, gently peel the decal back (usually works great with the decal laying face down, and rolling the backer paper off of it lightly while the vinyl decal lays on the table) and then soak the decal with the same solution on the sticky side.
-NOW, you should be able to get the placement and slide the decal around for proper placement.
-Then just rub the decal on entirely and work all the bubbles out if there are any that show up.
-Peel the application tape off the top and you should be good to go!
If you still see any bubbles, try and work them out or pop them if they bother you and cant resist, but over a couple days time, they will gas out and disappear on their own.
These are just a few that I designed. More pictures will post up as members get them installed!
SIFT THROUGH THE THREAD FOR MORE DESIGNS AS I CANT KEEP UP WITH POSTING EACH DESIGN!!
Whatever you want, I CAN CREATE!