LSC15's 95 Tacoma 4x4

Go Back   Tacoma World Forums > Vendors > CBI Off-Road Fab

Notices

Calling all 1st Gen Tacos with 4cylinders!!! -We need some help!

Reply
 
Thread Tools Search this Thread Display Modes
Old 01-05-2013, 10:46 AM   #1
Member
CBI Offroad Fab has a brilliant futureCBI Offroad Fab has a brilliant futureCBI Offroad Fab has a brilliant futureCBI Offroad Fab has a brilliant futureCBI Offroad Fab has a brilliant futureCBI Offroad Fab has a brilliant futureCBI Offroad Fab has a brilliant futureCBI Offroad Fab has a brilliant futureCBI Offroad Fab has a brilliant futureCBI Offroad Fab has a brilliant futureCBI Offroad Fab has a brilliant future
 
CBI Offroad Fab's Avatar
Joined: Oct 2010, #45457
Location: Idaho Falls, ID
Gender: Male
Posts: 620
CBI Offroad Fab's Tacoma Gallery
Calling all 1st Gen Tacos with 4cylinders!!! -We need some help!

Okay guys we are after some measurements off of a 1st generation Tacoma with a 4 cylinder. Preferably automatic but I want to take both so a manual trans will also do.

Please give us measurements of the following below. A picture would be really helpful too!

I will send a CBI hat to the two that are the best in helping us out! Here is what we need:

  • Distance between the cross member that holds up the transmission and the cross member that holds up the one carrier bearing.
a. Basically between each weld on the frame
  • The distance between the top of the frame and the lowest point of the floor pan from the same area above.
Much thanks to you all!!!


  Reply With Quote
Old 01-07-2013, 06:23 AM   #2
Member
CBI Offroad Fab has a brilliant futureCBI Offroad Fab has a brilliant futureCBI Offroad Fab has a brilliant futureCBI Offroad Fab has a brilliant futureCBI Offroad Fab has a brilliant futureCBI Offroad Fab has a brilliant futureCBI Offroad Fab has a brilliant futureCBI Offroad Fab has a brilliant futureCBI Offroad Fab has a brilliant futureCBI Offroad Fab has a brilliant futureCBI Offroad Fab has a brilliant future
 
CBI Offroad Fab's Avatar
Joined: Oct 2010, #45457
Location: Idaho Falls, ID
Gender: Male
Posts: 620
CBI Offroad Fab's Tacoma Gallery
Come on 1st gen guys! Just an FYI this thread is also posted on TTORA.
  Reply With Quote
Old 01-07-2013, 06:55 AM   #3
Senior Member
snoope is one of the sharper tools in the shedsnoope is one of the sharper tools in the shedsnoope is one of the sharper tools in the shedsnoope is one of the sharper tools in the shedsnoope is one of the sharper tools in the shedsnoope is one of the sharper tools in the shedsnoope is one of the sharper tools in the shedsnoope is one of the sharper tools in the shedsnoope is one of the sharper tools in the shedsnoope is one of the sharper tools in the shedsnoope is one of the sharper tools in the shed
 
snoope's Avatar
Joined: Jun 2009, #18414
Location: Ft.myers,FL
Gender: Male
Posts: 2,126
snoope's Tacoma Gallery
Nathan,

Good morning ....On my '02....2.7 4 cyl., automatic...

1) distance from outside of member One to member Two- 45"

2) distance inside of M-1 to M-2 36-1/2"

3) lowest part of floor pan is just above lines..just above frame rail.. 1"


pic #1 is M-2 holds carrier bearing
pic #2 is M-1 holds trans
pic #3 bottom of floor along driver side frame rail
pic #4 top of m-2 towards M-1
pic #5 floor pan and frame rail/driver side in front of M-2
pic #6 lowest point of floor pan drivers side frame rail before M-2

Dam I have to get under there and touch up with paint now...THANKS
Attached Thumbnails
Calling all 1st Gen Tacos with 4cylinders!!! -We need some help!-dsc04719.jpg   Calling all 1st Gen Tacos with 4cylinders!!! -We need some help!-dsc04718.jpg   Calling all 1st Gen Tacos with 4cylinders!!! -We need some help!-dsc04721.jpg   Calling all 1st Gen Tacos with 4cylinders!!! -We need some help!-dsc04725.jpg   Calling all 1st Gen Tacos with 4cylinders!!! -We need some help!-dsc04723.jpg  

Calling all 1st Gen Tacos with 4cylinders!!! -We need some help!-dsc04724.jpg  
  Reply With Quote
Old 01-25-2013, 10:59 AM   #4
Senior Member
snoope is one of the sharper tools in the shedsnoope is one of the sharper tools in the shedsnoope is one of the sharper tools in the shedsnoope is one of the sharper tools in the shedsnoope is one of the sharper tools in the shedsnoope is one of the sharper tools in the shedsnoope is one of the sharper tools in the shedsnoope is one of the sharper tools in the shedsnoope is one of the sharper tools in the shedsnoope is one of the sharper tools in the shedsnoope is one of the sharper tools in the shed
 
snoope's Avatar
Joined: Jun 2009, #18414
Location: Ft.myers,FL
Gender: Male
Posts: 2,126
snoope's Tacoma Gallery
Thank you Nathan,

Package arrived..

You now have your youngest "CBI fan"
Attached Thumbnails
Calling all 1st Gen Tacos with 4cylinders!!! -We need some help!-photo-2.jpg  
  Reply With Quote
Old 10-28-2013, 10:06 AM   #5
ASE Master Tech
BamaToy1997 is one of the sharper tools in the shedBamaToy1997 is one of the sharper tools in the shedBamaToy1997 is one of the sharper tools in the shedBamaToy1997 is one of the sharper tools in the shedBamaToy1997 is one of the sharper tools in the shedBamaToy1997 is one of the sharper tools in the shedBamaToy1997 is one of the sharper tools in the shedBamaToy1997 is one of the sharper tools in the shedBamaToy1997 is one of the sharper tools in the shedBamaToy1997 is one of the sharper tools in the shedBamaToy1997 is one of the sharper tools in the shed
 
BamaToy1997's Avatar
Marines: M1A2 hull/turret technician, 4th Maint Btn. 4th FSSG.
Name: Bill
Joined: Jan 2012, #71846
Location: Marion, AL
Age: 45
Gender: Male
Posts: 6,835
BamaToy1997's Tacoma Gallery
I see this was a while back, but if you ever need any other information for a 1997 4cyl, 4X4 Manual trans Tacoma, just let me know.
  Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
Calling ALL Black 1st Gen Tacomas Wreckless_71 1st Gen. Tacomas 207 08-27-2013 03:10 PM
Shopped 2nd gen Tacos, but then I saw this 1st gen... Drewski 1st Gen. Tacomas 4 10-05-2011 09:15 PM
SOLD 3rd Gen T4R 5 Spoke Wheels, fit 1st and 2nd gen Tacos derekabraham 1st Gen Tacoma Marketplace 14 09-20-2011 05:55 PM
Calling all 2nd gen BSP tacos... Black08Taco Buy / Sell / Trade 0 03-11-2010 10:14 AM


Copyright © 2014 Tacoma Forum. Tacoma World is not owned by, or affiliated with Toyota Motor Corporation.