air tool dont work???

i bought a air tool set from sears and everything works except the 3/8 ratchet wrench. any advice. when i press the handle air only comes out from the small vent on the top by the handle. i had the screw all the way in and all the way out, but nothing happens??? is it broken???

the impact gun works and the air hammer works, but the racthet wrench doesnt even turn.
here the ratchet wrench
http://www.sears.com/shc/s/p_10153_12605_00919932000P

and the air tool set i bought

http://www.sears.com/shc/s/p_10153_12605_00916852000P

 

Your grammar tool 'dont' work either. lol my teacher ways made me say something, just thought it was funny. I have no idea about the question though.

 

you do know that you can return it and exchange it right, bring in your receipt for that, i know in alaska, i can bring in a broken craftsmen tool and exchange no questions asked.

 

it brand new

 

sounds like its stuck between foreward and reverse....fuck it take it back lol

 

Maybe it needs lube?

 

I suggest reading the instructions.

And while you're at it, read the forum list, and learn to post in the right forum.

 

yeah sorry about that, i just wanted a faster response

 

Wow...tough crowd

 

Are they 2nd gen tools?

Crafstsman has lifetime warranty, just take it back and "it no work bro".

 

tell her to blow harder. you can thank me later

 

wooo keep that in the ug man

 

Didn't you know? EVERYTHING gets posted in the 2nd gen section...

(for a faster response of course)

 

This ^^^ and sometimes tapping it on the concrete a little bit helps free it up. My 3/8 air ratchet does this from time to time. It gets stuck between forward and reverse.

 

They all seem to lock up like that,,except for my IR wrench.

Santas bringing me a new 3/8" and 1/4" shortie air gun. Those get used more than my wrenches.

The fibre wipers in the air motor section probably are dry and really tight, since it is a new wrench. Use it as a regular ratchet on a bolt and see if it will free up. Use plenty of oil the first few times,,then a few drops every so often.

Sears has a really nice compact air/water separator thst should be sold with all those kits,,along with the air swivles that screw to the base of the tool.

 

Does it have a forward/reverse button? Are you sure it isn't between settings?

 

I have always been thought to put 2-3 drops every time before using it. And put about 5-6 or so drops in before its first use or it been sitting for years.

 

yes had turned it both ways cause when i turn it one way it stuck and when i turn it the other way it clicks vise versa