Mike "Wuzzy121". Rest in peace, brother

Go Back   Tacoma World Forums > Off-Topic > Garage / Workshop

Notices

Garage Re-org and Fence Project

Reply
 
Thread Tools Search this Thread
Old 03-07-2011, 10:11 AM   #1
macgyver [OP] macgyver is offline
Senior Member
macgyver is one of the sharper tools in the shedmacgyver is one of the sharper tools in the shedmacgyver is one of the sharper tools in the shedmacgyver is one of the sharper tools in the shedmacgyver is one of the sharper tools in the shedmacgyver is one of the sharper tools in the shedmacgyver is one of the sharper tools in the shedmacgyver is one of the sharper tools in the shedmacgyver is one of the sharper tools in the shedmacgyver is one of the sharper tools in the shedmacgyver is one of the sharper tools in the shed
 
macgyver's Avatar
Name: Brad
Joined: Aug 2009, #21173
Location: Canton, GA
Gender: Male
Posts: 3,566
macgyver's Tacoma Gallery
Garage Re-org and Fence Project

Took some pics of my recent projects.

I built some custom cabinets in my garage. I was tired of seeing things stored on shelves.

The two tall cabinets are 2'W X 8'T X 12" deep. The two upper cabinets are 41"W X 30"T X 12" deep. They had a killer deal on some cabinet grade plywood at Home Depot for $28 a sheet so I jumped on it. The materials were 5 sheets 3/4"x4x8 cabinet grade plywood, 1 sheet 1/2" MDF (for drawers), 2 sheets Luan (for backing), 24 Euro full overlay hinges, knobs, screws, glue, primer, paint, and drawer slides. All in all I spent about $350 on the cabinet materials.

I originally planned on doing drawers for the bottom sections of the tall cabinets but unfortunately I wasn't happy with the results since I couldn't get full extension slides in 12". I scrapped the drawer fronts and just put doors on the bottom section. Now unfortunately my drawers will not open because the door is in the way...oh well I will fix them later

I also built two 4x8 storage platforms to go above the garage door. Only about $60 in materials.

Next step for the garage is to put down the expoxy floor coating I have sitting in the house and paint the walls (haven't decided on a color yet.)

I also built a fence in my backyard last weekend for the dogs and to "define" my backyard so I can finish the landscaping back there this spring/summer.

The fence is 7' X 58' X 50' X 37' X 4'. I put in one 5' gate and one 6' gate. Spent about $1k in materials, food/drinks for help, and tool rental on the fence. Put in about 30 hours labor on it for my backyard and my nextdoor neighbor's backyard. Not bad considering my neighbor down the street spent $1700 for his fence w/ install. rented a two man auger for the holes and ended up having to rent a jackhammer for two of the holes (lots of big rocks under the soil).











  Reply With Quote
Old 03-07-2011, 10:14 AM   #2
With sufficient thrust, pigs fly just fine.
chris4x4 is one of the sharper tools in the shedchris4x4 is one of the sharper tools in the shedchris4x4 is one of the sharper tools in the shedchris4x4 is one of the sharper tools in the shedchris4x4 is one of the sharper tools in the shedchris4x4 is one of the sharper tools in the shedchris4x4 is one of the sharper tools in the shedchris4x4 is one of the sharper tools in the shedchris4x4 is one of the sharper tools in the shedchris4x4 is one of the sharper tools in the shedchris4x4 is one of the sharper tools in the shed
 
chris4x4's Avatar
Name: FlimFlubberJAM
Joined: May 2008, #6497
Location: Tenoe, AZ
Gender: Male
Posts: 96,686
chris4x4's Tacoma Gallery
Well done!
  Reply With Quote
Old 03-07-2011, 10:17 AM   #3
Senior Member
jmdaniel has much to be proud ofjmdaniel has much to be proud ofjmdaniel has much to be proud ofjmdaniel has much to be proud ofjmdaniel has much to be proud ofjmdaniel has much to be proud ofjmdaniel has much to be proud ofjmdaniel has much to be proud ofjmdaniel has much to be proud ofjmdaniel has much to be proud of
 
jmdaniel's Avatar
Army:
Joined: Oct 2010, #44965
Location: Austin, TX
Gender: Male
Posts: 285
jmdaniel's Tacoma Gallery
Looks great after the paint.
  Reply With Quote
Old 03-07-2011, 10:19 AM   #4
Not very sporting to fire on an unarmed opponent.
OZ-T is one of the sharper tools in the shedOZ-T is one of the sharper tools in the shedOZ-T is one of the sharper tools in the shedOZ-T is one of the sharper tools in the shedOZ-T is one of the sharper tools in the shedOZ-T is one of the sharper tools in the shedOZ-T is one of the sharper tools in the shedOZ-T is one of the sharper tools in the shedOZ-T is one of the sharper tools in the shedOZ-T is one of the sharper tools in the shedOZ-T is one of the sharper tools in the shed
 
OZ-T's Avatar
Name: Peter North
Joined: Dec 2009, #27584
Location: British Columbia
Gender: Dude
Posts: 819
OZ-T's Tacoma Gallery
Looks good man .

I love the paint can sawhorse extensions , lol .
  Reply With Quote
Old 03-07-2011, 10:20 AM   #5
Senior Member
pudge151 is one of the sharper tools in the shedpudge151 is one of the sharper tools in the shedpudge151 is one of the sharper tools in the shedpudge151 is one of the sharper tools in the shedpudge151 is one of the sharper tools in the shedpudge151 is one of the sharper tools in the shedpudge151 is one of the sharper tools in the shedpudge151 is one of the sharper tools in the shedpudge151 is one of the sharper tools in the shedpudge151 is one of the sharper tools in the shedpudge151 is one of the sharper tools in the shed
 
pudge151's Avatar
Name: Sean
Joined: Apr 2010, #34558
Location: Connecticut
Age: 32
Gender: Male
Posts: 2,036
pudge151's Tacoma Gallery
nice work
  Reply With Quote
Old 03-07-2011, 10:20 AM   #6
macgyver [OP] macgyver is offline
Senior Member
macgyver is one of the sharper tools in the shedmacgyver is one of the sharper tools in the shedmacgyver is one of the sharper tools in the shedmacgyver is one of the sharper tools in the shedmacgyver is one of the sharper tools in the shedmacgyver is one of the sharper tools in the shedmacgyver is one of the sharper tools in the shedmacgyver is one of the sharper tools in the shedmacgyver is one of the sharper tools in the shedmacgyver is one of the sharper tools in the shedmacgyver is one of the sharper tools in the shed
 
macgyver's Avatar
Name: Brad
Joined: Aug 2009, #21173
Location: Canton, GA
Gender: Male
Posts: 3,566
macgyver's Tacoma Gallery
Quote:
Originally Posted by OZ-T View Post
Looks good man .

I love the paint can sawhorse extensions , lol .

Haha yeah. I needed to make a "custom" outfeed table in order to rip those 4x8 sheets by myself
  Reply With Quote
Old 03-07-2011, 10:26 AM   #7
Senior Member
RLDTACO is one of the sharper tools in the shedRLDTACO is one of the sharper tools in the shedRLDTACO is one of the sharper tools in the shedRLDTACO is one of the sharper tools in the shedRLDTACO is one of the sharper tools in the shedRLDTACO is one of the sharper tools in the shedRLDTACO is one of the sharper tools in the shedRLDTACO is one of the sharper tools in the shedRLDTACO is one of the sharper tools in the shedRLDTACO is one of the sharper tools in the shedRLDTACO is one of the sharper tools in the shed
 
RLDTACO's Avatar
Name: Bob
Joined: Aug 2010, #41121
Location: Houston Tx.
Gender: Male
Posts: 11,762
RLDTACO's Tacoma Gallery
Cabinets look great! Good idea with storage above overhead door. I like the fence post caps, fancy, I just used black plastic caps. Posts will last longer!
  Reply With Quote
Old 03-07-2011, 10:31 AM   #8
macgyver [OP] macgyver is offline
Senior Member
macgyver is one of the sharper tools in the shedmacgyver is one of the sharper tools in the shedmacgyver is one of the sharper tools in the shedmacgyver is one of the sharper tools in the shedmacgyver is one of the sharper tools in the shedmacgyver is one of the sharper tools in the shedmacgyver is one of the sharper tools in the shedmacgyver is one of the sharper tools in the shedmacgyver is one of the sharper tools in the shedmacgyver is one of the sharper tools in the shedmacgyver is one of the sharper tools in the shed
 
macgyver's Avatar
Name: Brad
Joined: Aug 2009, #21173
Location: Canton, GA
Gender: Male
Posts: 3,566
macgyver's Tacoma Gallery
Quote:
Originally Posted by RLDTACO View Post
Cabinets look great! Good idea with storage above overhead door. I like the fence post caps, fancy, I just used black plastic caps. Posts will last longer!
They weren't super expensive ($4 each) and they added a nice finishing touch. I have seen people use them before and really liked the look so I decided to add them. I plan on staining the fence in probably May or June once the wood has time to dry out/weather a little.
  Reply With Quote
Old 03-07-2011, 10:49 AM   #9
Senior Member
Jones is one of the sharper tools in the shedJones is one of the sharper tools in the shedJones is one of the sharper tools in the shedJones is one of the sharper tools in the shedJones is one of the sharper tools in the shedJones is one of the sharper tools in the shedJones is one of the sharper tools in the shedJones is one of the sharper tools in the shedJones is one of the sharper tools in the shedJones is one of the sharper tools in the shedJones is one of the sharper tools in the shed
 
Jones's Avatar
Joined: Aug 2008, #8460
Location: Texas DFW
Gender: Male
Posts: 235
Jones's Tacoma Gallery
The cabinets look good. Overall look of the garage is great, very well organized look.

I am wanting to see a side shot of your truck with the wheels. Those are my second favorite factory wheels after the 16" offroads.
  Reply With Quote
Old 03-07-2011, 10:58 AM   #10
The Man!
JLee is one of the sharper tools in the shedJLee is one of the sharper tools in the shedJLee is one of the sharper tools in the shedJLee is one of the sharper tools in the shedJLee is one of the sharper tools in the shedJLee is one of the sharper tools in the shedJLee is one of the sharper tools in the shedJLee is one of the sharper tools in the shedJLee is one of the sharper tools in the shedJLee is one of the sharper tools in the shedJLee is one of the sharper tools in the shed
 
JLee's Avatar
Name: Jerry
Joined: Jul 2010, #40461
Location: Bay Area NorCal
Gender: Male
Posts: 14,862
JLee's Tacoma Gallery
Nice job man it looks good I love the cabinets.
  Reply With Quote
Old 03-07-2011, 11:02 AM   #11
macgyver [OP] macgyver is offline
Senior Member
macgyver is one of the sharper tools in the shedmacgyver is one of the sharper tools in the shedmacgyver is one of the sharper tools in the shedmacgyver is one of the sharper tools in the shedmacgyver is one of the sharper tools in the shedmacgyver is one of the sharper tools in the shedmacgyver is one of the sharper tools in the shedmacgyver is one of the sharper tools in the shedmacgyver is one of the sharper tools in the shedmacgyver is one of the sharper tools in the shedmacgyver is one of the sharper tools in the shed
 
macgyver's Avatar
Name: Brad
Joined: Aug 2009, #21173
Location: Canton, GA
Gender: Male
Posts: 3,566
macgyver's Tacoma Gallery
Quote:
Originally Posted by Jones View Post
The cabinets look good. Overall look of the garage is great, very well organized look.

I am wanting to see a side shot of your truck with the wheels. Those are my second favorite factory wheels after the 16" offroads.
Here you go

http://www.tacomaworld.com/forum/2nd...-285s-put.html
  Reply With Quote
Old 03-21-2011, 01:06 PM   #12
macgyver [OP] macgyver is offline
Senior Member
macgyver is one of the sharper tools in the shedmacgyver is one of the sharper tools in the shedmacgyver is one of the sharper tools in the shedmacgyver is one of the sharper tools in the shedmacgyver is one of the sharper tools in the shedmacgyver is one of the sharper tools in the shedmacgyver is one of the sharper tools in the shedmacgyver is one of the sharper tools in the shedmacgyver is one of the sharper tools in the shedmacgyver is one of the sharper tools in the shedmacgyver is one of the sharper tools in the shed
 
macgyver's Avatar
Name: Brad
Joined: Aug 2009, #21173
Location: Canton, GA
Gender: Male
Posts: 3,566
macgyver's Tacoma Gallery
Epoxy coated the floor this weekend.

I used the Rustoleum 2.5 car garage kit. It's a 2 part epoxy system. It came with 2 gallons of paint, 2 pints of activator/hardener, 2 bags of flakes (more than enough), and 2 packets of etcher/cleaner solution (powder). It was $104 at Home Depot.

I have done this before at another house and the key to good adhesion is PREP PREP PREP AND MORE PREP!

Here's the steps I took. I went above and beyond the instructions:

-I got started on friday night, took everything out of the garage (workbench, compressor, table saw, lawn equipment, etc. Put it all in my kitchen lol.
-I pressure washed it out with a little 1800 PSI karcher unit. I did this about 3 times on friday night. I also scraped anything off the floor (wood puddy, paint, glue, etc) with a shovel and/or a razor blade.
-Saturday morning I pressure washed it again.
-Then scrubbed it with a purple power degreaser solution. After that I rinsed it out a few times.
-Mixed up about 1/2 quart of Muriatic acid in about 2.5 gallons of water. Always wear eye protection, gloves, and a respirator bc this stuff is corrosive and can burn your skin if you have sensitive skin. I slowly poured this on the floor working in sections using the squegee to evenly distribute it and using the deck brush to scrub it in. When you hear it fizzing you know it's a strong enough mixture.
-sprinkled baking soda all over the floor to nuetralize the acid, then rinsed this out about 3 times to be sure I got all of the acid out.
-I cleaned the floor again with a purple power solution and rinsed about 2 more times.
-Now I used the etcher/cleaner solution that came with the kit. Followed the directions and mixed it in 2 gallons of water. I applied this just like I did with the muriatic acid.
-I rinsed it out about 3 more times with the pressure washer.
-Squegeed the garage dry.
-Then I set up 4 box fans in the garage. I pointed one fan from one corner facing the other corner, The next fan then points towards the next, and so on. Basically this created a clockwise vortex of airflow to dry it out. I did this at about 12:30PM and left the fans on the rest of the day (with the garage door open while I was home) and they stayed on until I painted the next day (about noon on Sunday) so I basically let the floor dry for a good 24 hours.
-Sunday morning about 11:30 I mixed up the paint, following directions, based on temperature you have to let it sit for a certain amount of time after mixing before you start painting. (make sure you wear gloves and a respirator, longs sleeves aren't a bad idea either, I had to use rubbing alcohol to clean the paint off of my elbows and knees)
-Cut it around all the edges and the small vertical sections of concrete with a paintbrush (buy a cheap throwaway brush)
-Then I began rolling the floor using a 9" roller with 1/2" nap. I would paint about a 3'X6' section, sprinkle the flakes/chips, then move to the next section.

Painting the floor took less than an hour but prep work took about 4 hours minus drying time.

Let the floor dry for 24 hours before you attempt to walk on it or put anything back in the garage. The kit says wait 3 days before pulling the cars back in the garage. I say 4-5 to be safe, and use cardboard under the tires for the first week.

Here's a pic of the final result, I took this morning. I will take some more when I get home today.

  Reply With Quote
Old 03-21-2011, 01:33 PM   #13
Senior Member
Hardscrabble is one of the sharper tools in the shedHardscrabble is one of the sharper tools in the shedHardscrabble is one of the sharper tools in the shedHardscrabble is one of the sharper tools in the shedHardscrabble is one of the sharper tools in the shedHardscrabble is one of the sharper tools in the shedHardscrabble is one of the sharper tools in the shedHardscrabble is one of the sharper tools in the shedHardscrabble is one of the sharper tools in the shedHardscrabble is one of the sharper tools in the shedHardscrabble is one of the sharper tools in the shed
 
Hardscrabble's Avatar
Name: Scott
Joined: Feb 2011, #50838
Location: McDonough, GA
Gender: Male
Posts: 1,361
Hardscrabble's Tacoma Gallery
Really nice job on the cabinets, fence, and garage flooring.
  Reply With Quote
Old 03-21-2011, 02:24 PM   #14
Senior Member
Jones is one of the sharper tools in the shedJones is one of the sharper tools in the shedJones is one of the sharper tools in the shedJones is one of the sharper tools in the shedJones is one of the sharper tools in the shedJones is one of the sharper tools in the shedJones is one of the sharper tools in the shedJones is one of the sharper tools in the shedJones is one of the sharper tools in the shedJones is one of the sharper tools in the shedJones is one of the sharper tools in the shed
 
Jones's Avatar
Joined: Aug 2008, #8460
Location: Texas DFW
Gender: Male
Posts: 235
Jones's Tacoma Gallery
Quote:
Originally Posted by macgyver View Post
Epoxy coated the floor this weekend.

I used the Rustoleum 2.5 car garage kit. It's a 2 part epoxy system. It came with 2 gallons of paint, 2 pints of activator/hardener, 2 bags of flakes (more than enough), and 2 packets of etcher/cleaner solution (powder). It was $104 at Home Depot.

I have done this before at another house and the key to good adhesion is PREP PREP PREP AND MORE PREP!

Here's the steps I took. I went above and beyond the instructions:

-I got started on friday night, took everything out of the garage (workbench, compressor, table saw, lawn equipment, etc. Put it all in my kitchen lol.
-I pressure washed it out with a little 1800 PSI karcher unit. I did this about 3 times on friday night. I also scraped anything off the floor (wood puddy, paint, glue, etc) with a shovel and/or a razor blade.
-Saturday morning I pressure washed it again.
-Then scrubbed it with a purple power degreaser solution. After that I rinsed it out a few times.
-Mixed up about 1/2 quart of Muriatic acid in about 2.5 gallons of water. Always wear eye protection, gloves, and a respirator bc this stuff is corrosive and can burn your skin if you have sensitive skin. I slowly poured this on the floor working in sections using the squegee to evenly distribute it and using the deck brush to scrub it in. When you hear it fizzing you know it's a strong enough mixture.
-sprinkled baking soda all over the floor to nuetralize the acid, then rinsed this out about 3 times to be sure I got all of the acid out.
-I cleaned the floor again with a purple power solution and rinsed about 2 more times.
-Now I used the etcher/cleaner solution that came with the kit. Followed the directions and mixed it in 2 gallons of water. I applied this just like I did with the muriatic acid.
-I rinsed it out about 3 more times with the pressure washer.
-Squegeed the garage dry.
-Then I set up 4 box fans in the garage. I pointed one fan from one corner facing the other corner, The next fan then points towards the next, and so on. Basically this created a clockwise vortex of airflow to dry it out. I did this at about 12:30PM and left the fans on the rest of the day (with the garage door open while I was home) and they stayed on until I painted the next day (about noon on Sunday) so I basically let the floor dry for a good 24 hours.
-Sunday morning about 11:30 I mixed up the paint, following directions, based on temperature you have to let it sit for a certain amount of time after mixing before you start painting. (make sure you wear gloves and a respirator, longs sleeves aren't a bad idea either, I had to use rubbing alcohol to clean the paint off of my elbows and knees)
-Cut it around all the edges and the small vertical sections of concrete with a paintbrush (buy a cheap throwaway brush)
-Then I began rolling the floor using a 9" roller with 1/2" nap. I would paint about a 3'X6' section, sprinkle the flakes/chips, then move to the next section.

Painting the floor took less than an hour but prep work took about 4 hours minus drying time.

Let the floor dry for 24 hours before you attempt to walk on it or put anything back in the garage. The kit says wait 3 days before pulling the cars back in the garage. I say 4-5 to be safe, and use cardboard under the tires for the first week.

Here's a pic of the final result, I took this morning. I will take some more when I get home today.
Thanks for posting this up. I am planning on the same thing in a week or so. Clean the floor and washing it all out looks to be the bulk of it all.
  Reply With Quote
Old 03-21-2011, 02:31 PM   #15
Senior Member
davidpick is one of the sharper tools in the sheddavidpick is one of the sharper tools in the sheddavidpick is one of the sharper tools in the sheddavidpick is one of the sharper tools in the sheddavidpick is one of the sharper tools in the sheddavidpick is one of the sharper tools in the sheddavidpick is one of the sharper tools in the sheddavidpick is one of the sharper tools in the sheddavidpick is one of the sharper tools in the sheddavidpick is one of the sharper tools in the sheddavidpick is one of the sharper tools in the shed
 
davidpick's Avatar
Firefighter:
Name: David
Joined: Jan 2010, #29760
Location: Everett, WA
Age: 26
Gender: Male
Posts: 1,692
davidpick's Tacoma Gallery
wow, that looks great! nothing better than enjoying a clean and organized garage, especially one you've taken the time to build up yourself!
  Reply With Quote
Old 03-21-2011, 02:32 PM   #16
Senior Member
RLDTACO is one of the sharper tools in the shedRLDTACO is one of the sharper tools in the shedRLDTACO is one of the sharper tools in the shedRLDTACO is one of the sharper tools in the shedRLDTACO is one of the sharper tools in the shedRLDTACO is one of the sharper tools in the shedRLDTACO is one of the sharper tools in the shedRLDTACO is one of the sharper tools in the shedRLDTACO is one of the sharper tools in the shedRLDTACO is one of the sharper tools in the shedRLDTACO is one of the sharper tools in the shed
 
RLDTACO's Avatar
Name: Bob
Joined: Aug 2010, #41121
Location: Houston Tx.
Gender: Male
Posts: 11,762
RLDTACO's Tacoma Gallery
Good job on floor! Used the same product on my garage when we built a couple of yrs ago. Really helps keeping things clean.
  Reply With Quote
Old 03-21-2011, 02:39 PM   #17
Senior Member
The1youluv2hate is one of the sharper tools in the shedThe1youluv2hate is one of the sharper tools in the shedThe1youluv2hate is one of the sharper tools in the shedThe1youluv2hate is one of the sharper tools in the shedThe1youluv2hate is one of the sharper tools in the shedThe1youluv2hate is one of the sharper tools in the shedThe1youluv2hate is one of the sharper tools in the shedThe1youluv2hate is one of the sharper tools in the shedThe1youluv2hate is one of the sharper tools in the shedThe1youluv2hate is one of the sharper tools in the shedThe1youluv2hate is one of the sharper tools in the shed
 
The1youluv2hate's Avatar
Name: Peps
Joined: Sep 2010, #43233
Location: SP... CaL
Gender: Male
Posts: 3,159
The1youluv2hate's Tacoma Gallery
Nice .. This will b my next project
  Reply With Quote
Old 12-07-2012, 08:06 AM   #18
Senior Member
jsmarine is one of the sharper tools in the shedjsmarine is one of the sharper tools in the shedjsmarine is one of the sharper tools in the shedjsmarine is one of the sharper tools in the shedjsmarine is one of the sharper tools in the shedjsmarine is one of the sharper tools in the shedjsmarine is one of the sharper tools in the shedjsmarine is one of the sharper tools in the shedjsmarine is one of the sharper tools in the shedjsmarine is one of the sharper tools in the shedjsmarine is one of the sharper tools in the shed
Marines: 6th Motor Transport Battalion
Name: Jeff
Joined: May 2010, #37889
Location: Dallas, TX
Age: 34
Gender: Male
Posts: 482
jsmarine's Tacoma Gallery
Hey Macgyver, how has that garage floor held up over the last year and a half? Im thinking of doing this to my garage floor.
  Reply With Quote
Old 12-09-2012, 07:41 PM   #19
macgyver [OP] macgyver is offline
Senior Member
macgyver is one of the sharper tools in the shedmacgyver is one of the sharper tools in the shedmacgyver is one of the sharper tools in the shedmacgyver is one of the sharper tools in the shedmacgyver is one of the sharper tools in the shedmacgyver is one of the sharper tools in the shedmacgyver is one of the sharper tools in the shedmacgyver is one of the sharper tools in the shedmacgyver is one of the sharper tools in the shedmacgyver is one of the sharper tools in the shedmacgyver is one of the sharper tools in the shed
 
macgyver's Avatar
Name: Brad
Joined: Aug 2009, #21173
Location: Canton, GA
Gender: Male
Posts: 3,566
macgyver's Tacoma Gallery
Quote:
Originally Posted by jsmarine View Post
Hey Macgyver, how has that garage floor held up over the last year and a half? Im thinking of doing this to my garage floor.
It's holding up well. I have a few small dime sized chips where it came up. I dripped some glue on the floor and when I went to scrape it up later, it pulled up some of the paint.
  Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Similar Threads
Thread Thread Starter Forum Replies Last Post
Iowa wheeling - miobi.org krap22 Mid West 4 11-15-2011 08:43 AM
T4R.org tacovic Off-Topic Discussion 2 05-08-2010 09:53 PM
Does this org. tolerate failure? se7en_factors New Members 20 11-26-2009 02:05 PM
Failblog.org Hardcorehehaw Off-Topic Discussion 2 04-10-2009 07:50 PM
If you're on the fence about getting supercharged, get off the fence. Vege-Taco Performance and Tuning 17 07-28-2008 12:53 PM


Copyright © 2014 Tacoma Forum. Tacoma World is not owned by, or affiliated with Toyota Motor Corporation.