4" Spindles (with Brake Lines) by MaxTrac GroupBuy Nov. 3 - Nov. 11

Sorry all spindles are sold out and waiting on more

 

Sure about that

http://www.bytortruck.com/product_info.php?manufacturers_id=71&products_id=10011

 

as far as my Inventory and Maxtrac they are sold out, I am sure there are other retailers that might have a few sets left, I buy direct and not from other retailers, I will have more once more are available, they are saying April sometime.

 

Haha I guess I was wrong I wasn't aware u were a vendor
I apologize for that

 

ive purchased form darren...great guy, no complaints here...couldnt be happier. click on my profile pics to check out what darren did to my truck

 

<img src=http://i132.photobucket.com/albums/q16/b-radxXx/tacomafrontshot.jpg>

 

Any update on availability with these? Also, I am assuming that the brake lines are necessary with this lift which is why they are offering those also?

 

Yeah brake lines will have to b swapped out.

 

Would they have to be swapped out with AAL or a leaf pack in the back also?

 

If you go above 2", yes.

 

Thanks!

 

anyone notice that when you turn it feels like there is a pop feeling in the steering wheel? usually when completing a turn? i thought maybe the tie rods

 

Yeah bro, Im pretty sure its the tabs hitting. The tabs that stick out where you connect your lines to the spindles. Look at the other mx spindle thread, sum one covered that on one of the last 4-7 pages.

 

so if i trimmed the tabs off it would cure it? it kind of annoying actually.....and i havnt noticed it before...did you ad locktight to the hub bolts?

 

Yeah, if you turn it at full lock, you can c where it would actually hit. I havent trimmed mine cause ive been busy but I try n avoid full lock.

 

i just noticed this same popping noise also, but i thought i did something wrong at install, so ur saying its the mount for the brake lines?

 

im gonna check it out tommaro, i thought i messed up on the install also, where is the tab hitting? the coil?

 

The black metal retaining mount that you remove from stock spindle and place on the new spindle that holds the bottom end of the brake line at full lock will hit. It's actually hitting the swaybar. I posted a picture of what I quickly cut to fix the problem. I'll grind it down pretty and spraypaint when I get back from deployment.

 

This is from the other thread titled maxtrac spindles for 2nd gen prerunner its on pg 19 n shows the picture.

 

I forget where it hits but you'll c it when u look.