Originally Posted by parboy
Still having the problem with the bulb spinning, really just on the pass side for some reason. I am going to take it apart and try adding another washer in there to try to keep more pressure on the bulb in the notch.
Well got that fixed. Just added a simple rubber o-ring between the metal ring and the rubber washer and it locks up tight! I am done, for now
I will have to tear it all down again to get the alignment completely level since I just eyeballed it the first time and am off by a couple degree's. As long as I'm not wall hunting with the lights it's not noticeable at all, so I am gonna roll with it for a bit while I tackle my suspension mods