THE RETROFIT SOURCE FX-R / Mini GROUP BUY (only need 10) ROUND 4

25% off stage III kits and please add $10 for shipping.
Thanks! My PayPal is burt.truong@gmail.com

25% off:

FX-R Stage III
Mini H1 Stage III
Mini D2S Stage III
Lexus RX-AFS Stage III
__________________

-Stage III complete kits
-no Osram/Philip bulb upgrade discount
-no angel eye or LED halo discount
-10 orders = 25% off
-ships when 10 orders are completed
-THIS RETROFIT IS PURCHASED DIRECTLY FROM ME. WILL DROP SHIP FROM TRS
-shipping is flat rate of $10 within continental U.S.
-$30 shipping to Canada

info posted by buzzardsgottaeat
A lot of people get the mini (H1 or D2S) because they're easiest to install

FX-Rs are better quality but require free hand cutting of your light housing and a slightly more difficult aiming/securing process.

Blazers are for fogs, you have to cut/rig it up custom, no plug n play or bake n reseal there.

H4 headlights
H10 fogs (H11 for 2012s) are the sizes you need and the harness will be the H4/9003 iirc

H1 has been deemed a little brighter while D2S more even output. Most go with the H1 simply because its brighter but don't consider other factors. Matt and the guys at TRS mostly favor the D2S and I also like to point out that the larger shrouds fill our headlights better than the mini H1 and there is a greater selection.

3000k is yellowish and good for fogs for its ability to cut through adverse weather

4300k is like sunlight or stock color headlights and has the highest lumen count (brightest) of the available options

5000k will be whiter and is the highest TRS recommends.
6000k is also very white with a tiny bit more blue

Any higher temp is stupid because you lose light output and fatigue your eyes and others.

I always say 4300k is the way to go but can see how white/5000k has an appeal

The upside to a projector retrofit vs cheap hid bulbs in your stock light housing is mainly that it is higher quality and has a clean cut off line.

I can't think of anything else off the top of my head but that should be a good starting point for anyone who wants to start researching these.

please add your name to the most recent list.
1.
2.
3.
4.
5.




Picture below is omac5's FX-R retrofit. (let me know if you want picture taken down)

 

Subbed... hope to get in on this one.

 

Same.... Hope taxes come back soon!

 

Finally made an account just to get in on this GB.

Mini H1 Stage III Kit
Ballasts - 3Five 35W
Bulbs - 3Five 5000K. **please order extra pair
Halos- No thanks
Projectors - LHD
Glue - yes please
Shrouds - Mini Gatling Gun
Relay - H4/9003

EDIT: Nevermind, Just ordered directly from the site

 

So the price for these. Is it the price listed plus 25% off or is the price listed 25% off already?

 

25% off list price. ie FXR = $315 list, $236.25 with discount

 

Plus 10 for shipping

 

subd

 

I'm in.

D2S, 35w, Gatling Gun, Philips 85122+ lamps, Glue, H4/9003 harness,
295 + 10=305 * 0.75 = 228.75 + 45 + 10 = 283.75 total?

 

question, if i have a slimcubby kit for my stock headlights, is it possible to just get the housing assembly to fit that setup? or do i start over from scratch?

 

subbing this to see how long it takes to get 10 people, we'll see if i have dinero by then

 

1. Rich91710 - D2S Mini Stage 3, Gatling Gun shroud, Phillips 85122+ bulbs, glue, h4 harness

$283.75 total

2.
3.
4.
5.

 

Correct.

You would start over from scratch as the bulbs don't fit in the projectors. You're better off selling your HID kit and starting over.

 

Sub'd... I need to ask a few questions, I will probably be in on this.... Let you know soon.

 

I'm in, so do we order with coupon code or wait for 10 people...

Bi-xenon Morimoto Mini Stage III Kit (D2S)$295.00
— Ballasts: 4) Denso Slim (35w)+$50.00
— Bulbs: Morimoto 5Five 5000K D2S
— Halos: No Thanks
— Projectors: LHD (North American Standard)
— Re-sealing Glue: Yes please+$10.00
— Shrouds: Gatling Gun
— Wire Harness: Relay: H4/9003

Total with shipping 276.25? I

 

You don't want Denso slims, they're noisy, not waterproof, and big. Stick with Morimotos.

 

I'm in, so do we order with coupon code or wait for 10 people...

Bi-xenon Morimoto Mini Stage III Kit (D2S)$295.00
— Ballasts: Morimoto 35w
— Bulbs: Morimoto 5Five 5000K D2S
— Halos: No Thanks
— Projectors: LHD (North American Standard)
— Re-sealing Glue: Yes please+$10.00
— Shrouds: Gatling Gun
— Wire Harness: Relay: H4/9003

Total with shipping 226.25?

 

Hi Doug, once we get 10 people, you will pay via PayPal. Total is $238.75 with shipping.

 

1. Rich91710 - D2S Mini Stage 3, Gatling Gun shroud, Phillips 85122+ bulbs, glue, h4 harness

$283.75 total

2. douglasmc - Mini Stage III Kit (D2S), 35W ballasts, 5000k bulbs, YES glue, Gatling Gun shroud, h4 harness $238.75 shipped

3.
4.
5.

 

I'm in please...

Bi-xenon Morimoto Mini Stage III Kit (H1)
— Ballasts: Morimoto 35w
— Bulbs: Morimoto 5Five 6000K D2S
— Halos: No Thanks
— Projectors: LHD (North American Standard)
— Re-sealing Glue: Yes please+$10.00
— Shrouds: Gatling Gun
— Wire Harness: Relay: H4/9003

Burt, can you confirm this will be the same one as the pic I sent you via PM? THanks

Edwin