25% off stage III kits and please add $10 for shipping.
Thanks! My PayPal is email@example.com
FX-R Stage III
Mini H1 Stage III
Mini D2S Stage III
-Stage III complete kits
-no Osram/Philip bulb upgrade discount
-no angel eye or LED halo discount
-10 orders = 25% off
-ships when 10 orders are completed
-THIS RETROFIT IS PURCHASED DIRECTLY FROM ME. WILL DROP SHIP FROM TRS
-shipping is flat rate of $10 within continental U.S.
-$30 shipping to Canada
-$65 shipping to Australia
info posted by buzzardsgottaeat (edited by myself for length)
A lot of people get the mini (H1 or D2S) because they're easiest to install
FX-Rs are better quality but require free hand cutting of your light housing and a slightly more difficult aiming/securing process.
the harness will be the H4/9003 for most people on here
H1 has been deemed a little brighter while D2S more even output. Most go with the H1 simply because its brighter but don't consider other factors. Matt and the guys at TRS mostly favor the D2S and I also like to point out that the larger shrouds fill our headlights better than the mini H1 and there is a greater selection.
3000k is yellowish and good for fogs for its ability to cut through adverse weather
4300k is like sunlight or stock color headlights and has the highest lumen count (brightest) of the available options
5000k will be whiter and is the highest TRS recommends.
6000k is also very white with a tiny bit more blue
Any higher temp is stupid because you lose light output and fatigue your eyes and others.
I always say 4300k is the way to go but can see how white/5000k has an appeal
The upside to a projector retrofit vs cheap hid bulbs in your stock light housing is mainly that it is higher quality and has a clean cut off line.
I can't think of anything else off the top of my head but that should be a good starting point for anyone who wants to start researching these.
please add your username and first name to the most recent list.
1. ambiguous, Burt - H1 Stage III w/ Gatling Gun shrouds, 35W ballasts, 5000k bulbs, XB LED halos (white) [optional], H4/9003 relay harness, Resealing Glue - yes/no
Picture below is omac5's FX-R retrofit. (let me know if you want picture taken down)