A new GB sign up has started! If interested, add yourself to the sign up list. All info in this post as far as pricing is still the same in the new GB, the end dates etc listed are not accurate any more.
Hey guys, if you're looking to beef up your weak factory tailgate now is your chance!
Here's how the GB will work
. Automatic 10% off to anyone who signs up. If we get past 10 orders, then ever person past will equal another percent off (up to a maximum 30% discount).
Example: 18 people order = 18% discount. 37 people order = 30% discount
The regular list price for the reinforcement is $169, so it can be had for as low as $118.30+ shipping in the GB with 30+ sign ups
PLEASE- only sign up if you fully intend on ordering. If you decide you want to back out after signing up, please say so and I'll edit the sign up list accordingly. Thanks
And now a bonus for you all-
if we get over 40 orders, then one order will be randomly selected to get theirs for free(less shipping costs)!
GB sign up starts now!
I'll release the GB discount promo code with appropriate discount level applied based on the sign up list total on the 1st of January 2013. At that time, the coupon code will automatically expire 7 days later and orders later than that will no longer be eligible for the GB price.
Orders will be filled in the order that we receive them once the discount code is released and ordering begins.
Please allow approximately 2-3 weeks for fabrication + the shipping time, so you should get your reinforcements between mid-late January.
During the GB, material choice on the covers will be 14ga steel, or .100" aluminum (not aluminum diamond plate, just plain aluminum). All covers will ship bare metal. Aluminum can be left bare and will oxidize lightly(depends on how harsh the environment is where you live), but steel will need to be coated with your choice of product to prevent rust. Aerosol can bed liner is affordable and decently durable so for most people that is what I would recommend coating with, but any coating that sticks to metal can be used. Powdercoat, line-x, auto paint, spray paint, etc
Installation is simple:
After coating your cover with your choice of coating, simply lower your tailgate and remove the torx head screws holding the plastic covers on. The top edge piece unclips off the edge of the tailgate, and the larger cover then simply lifts off.
Next, slip the Relentless tailgate reinforcement on the tailgate(mind the formed lip on the cover so as to not scratch the outside of the tailgate. Foam 'camper tape' can be applied to the inside of the protector lip to help protect the paint if desired). Once the mounting holes are lined up, start all the screws, then tighten down each one while working from the center to the sides. Do not over-tighten, they secure into plastic inserts that can be stripped if too much torque is applied. Finally, enjoy some peace of mind that your tailgate is now much stronger(not invincible though ;))!
Here is the link to the product page on my website for information on the product. http://www.relentlessfabrication.us/...87&id=14437186
Photos from member 'swordknives'. Factory plastic cover can now be placed over the reinforcement if desired: