Tacoma World Forums

Tacoma World Forums (http://www.tacomaworld.com/forum/)
-   Group Buys (http://www.tacomaworld.com/forum/group-buys/)
-   -   Feeler: Pelfreybilt 2012+ Front Hybrid Bumper GB (http://www.tacomaworld.com/forum/group-buys/266612-feeler-pelfreybilt-2012-front-hybrid-bumper-gb.html)

Monster Coma 03-04-2013 07:04 PM

Feeler: Pelfreybilt 2012+ Front Hybrid Bumper GB
 
Alright guys Tyler gave me the go ahead to post this.

Pelfreybilt will be doing a group buy for their 2012+ Front Hybrid Bumpers. Remember this will only fit 12+ for right now, However! He may add in the 05+ once he finishes perfecting it. At this time we are just gauging interest to see if there will be enough interest to make this possible. We are looking for at least 10 people to get this going. If we can get 10 people signed up the bumper will be $100 off

2012 and Up front Hybrid Winch Bumpers
These bumpers are made from 1/4" Steel plate in the critical mounting areas, winch, fairlead, 3/4" D-Ring mounts and frame mounts. The front cover is ga (.135) Side tubes are 1.75 X .120" wall Tubing.

Winches must have a divorced solenoid box to fit. (recommend Warn 9.5XP, M8000, VR8000 or VR1000 with Synthetic lines and Hawse fairleads)

LED Bar cutout for Rigid 20" SR series bar

Base Bumper $525 (Includes all access cutouts, D-Ring Mounts and Winch Provisions)
Add LED bar Cutout $75.00
Add Center Hoop, includes lateral supports $110.00
Powdercoat $150.00

Includes back brace supports that tie into frame where the sway bar connects

Shipping thru Fastenal is as follows:
Pacific time zone: $75
Mtn time zone: $100
Central time zone: $125
Eastern time zone: $150


Remember at this time this is just a feeler but please feel free to leave your name saying if you are in or not!

1.
2.
3.
4.
5.
6.
7.
8.
9.
10.

Thanks for looking guys!

VolcomTacoma2011 03-04-2013 07:26 PM

I'm putting my name down for the 2011 edition. Dibs.

Socalduckslayer 03-04-2013 08:05 PM

Sub'd :D

SoJersey 03-06-2013 04:32 PM

How much to add a 2" receiver under the winch mount?

Socalduckslayer 03-06-2013 04:57 PM

Quote:

Originally Posted by SoJersey (Post 6548329)
How much to add a 2" receiver under the winch mount?

Figure about $125. Would have to open up the vent holes in the face as well for easier access to hitch pin

Moku808 03-07-2013 03:48 PM

Any shipping to Hawaii?

650H1 03-07-2013 03:55 PM

i might be interested in a 05-11 group buy, with center hoop, and powdercoat... just want to be clear that i'd be interested in the center hoop/lateral supports only - no headlight protectors.... if there ever even is a 05-11 GB :)

VolcomTacoma2011 03-07-2013 03:56 PM

Puh, I tried it already :D. He's still several weeks away from starting those.

However, as soon as they are ready, I'm cool with starting GB for the '05-'11s.

Socalduckslayer 03-07-2013 05:40 PM

Quote:

Originally Posted by Moku808 (Post 6553545)
Any shipping to Hawaii?

Shouldn't be an issue, would have to reconfirm with fastenal freight. They have been hit and miss with Hawaii. 150.00 is the typical price for bumpers o Hawaii.

Monster Coma 03-08-2013 07:34 PM

bump

Uncle Cliffy 03-08-2013 08:03 PM

Oooooh. I like.

Interested in one for my 06 though...

VolcomTacoma2011 03-08-2013 08:36 PM

I'm gonna talk to Tyler about doing a group but once he starts building the '05-'11s

Datsik 03-10-2013 12:30 PM

Quote:

Originally Posted by VolcomTacoma2011 (Post 6560445)
I'm gonna talk to Tyler about doing a group but once he starts building the '05-'11s

Who's doing a group but? :P

That's legit man, I already got a few people not on the forums wanting a bumper for the 05-11s; should fill up quick once you get it going.

I don't know why this list isn't full yet -_-

VolcomTacoma2011 03-10-2013 12:33 PM

Hahah group buy* good call. Probably updated that on my phone and didn't catch the typo :D.

As for the group buy...I think we're still on hold until Tyler starts work on the '05-'11s, which won't be for another couple of weeks I'm guessing.

Once it is out and ready for production, I'll be trying to get a group buy going for it, as I know a lot of people are interested in it.

Monster Coma 03-10-2013 01:04 PM

Quote:

Originally Posted by VolcomTacoma2011 (Post 6566594)
Hahah group buy* good call. Probably updated that on my phone and didn't catch the typo :D.

As for the group buy...I think we're still on hold until Tyler starts work on the '05-'11s, which won't be for another couple of weeks I'm guessing.

Once it is out and ready for production, I'll be trying to get a group buy going for it, as I know a lot of people are interested in it.

:gossip: I'll be doing a GB once Tyler gives me the go, the only reason this isn't for both is because Tyler has OCD and wants his bumpers to be perfect before they are put into production.

VolcomTacoma2011 03-10-2013 01:10 PM

There ya go! Can't wait to get my bumper :D

Monster Coma 03-10-2013 01:11 PM

Quote:

Originally Posted by VolcomTacoma2011 (Post 6566726)
There ya go! Can't wait to get my bumper :D

:thumbsup: Me either, Tyler just sent me a pic Friday night of it all wrapped up ready to ship, it was awesome :D:cool:

SoJersey 03-11-2013 07:09 PM

sooo tempting.....

Socalduckslayer 03-11-2013 07:13 PM

Quote:

Originally Posted by SoJersey (Post 6574198)
sooo tempting.....

Do it!!
I have a plate bumper feeler too. Ill combine the group buys for plate and hybrids once we get close to 10 combined, bout half way there...

Monster Coma 03-13-2013 08:24 AM

Bump!


All times are GMT -7. The time now is 09:07 AM.