Tacoma World Forums

Tacoma World Forums (http://www.tacomaworld.com/forum/)
-   Group Buys (http://www.tacomaworld.com/forum/group-buys/)
-   -   Feeler: Pelfreybilt 2012+ Front Plate Bumper GB (http://www.tacomaworld.com/forum/group-buys/266718-feeler-pelfreybilt-2012-front-plate-bumper-gb.html)

Monster Coma 03-05-2013 10:35 AM

Feeler: Pelfreybilt 2012+ Front Plate Bumper GB
 
Alright guys Tyler gave me the go ahead to post this.

Pelfreybilt will be doing a group buy for their 2012+ Front Plate Bumpers. Remember this will only fit 12+ for right now, However! He may add in the 05+ once he finishes perfecting it. At this time we are just gauging interest to see if there will be enough interest to make this possible. We are looking for at least 10 people to get this going. If we can get 10 people signed up the bumper will be $100 off

2012 Front Plate Bumpers

These bumpers are made from 1/4" Steel plate in the critical mounting areas, winch, fairlead, D-Ring mounts and frame mounts. The front cover and side wings are 10 ga (.135) total weight with headlight/grill tubes is appx 110lbs. D-ring mount and Hi-lift jacking points are standard on all bumpers. Winches must have a divorced solenoid box to fit. (reccomend Warn 9.5XP, M8000, VR8000 or VR1000 with Synthetic lines and Hawse fairleads)

Options include fog light cutouts (Rigid Duallies recommended or a smaller 3" fog)

LED Bar cutout for Rigid 20" SR series bar

Upper tubes for headlight and grille protection

Base Bumper $700.00 (Includes all access cutouts, D-Ring Mounts and Winch Provisions)
Add Fog Cutouts $75.00
Add LED bar Cutout $75.00
Add full upper tubes, 3 piece center and headlight $150.00
Add Center tube only, includes lateral supports $110.00
Powdercoat $150.00

Includes back brace supports that tie into frame where the sway bar connects

Shipping thru Fastenal is as follows:
Pacific time zone: $75
Mtn time zone: $100
Central time zone: $125
Eastern time zone: $150

Estimated lead time for all 10 bumpers is only 4-6 weeks!

http://www.tacomaworld.com/gallery/d...liveTmsIY1.jpg
http://i1160.photobucket.com/albums/...5603379613.jpg
http://i1160.photobucket.com/albums/...028_161049.jpg
http://i1160.photobucket.com/albums/...t/_A193075.jpg

Remember at this time this is just a feeler but please feel free to leave your name saying if you are in or not!

1. Mike Pinsker
2. xct2000
3. chris5255
4. max2
5. KegBuster
6. BigSkyCountry
7. RDtres
8. laltaffer
9.
10.

Thanks for looking guys!

2013 2.7 03-06-2013 07:09 PM

does it require any fender cutting

Monster Coma 03-06-2013 07:19 PM

No fender cutting, you will have to cut out plastic wheel tub. Well you dont have to but it would look pretty weird lol

Socalduckslayer 03-06-2013 07:52 PM

You can cut or tuck plastic fender liner. No other mods are required. Bolts up
directly into factory locations.

Monster Coma 03-08-2013 07:34 PM

bump

Mike Pinsker 03-08-2013 08:43 PM

plate bumper
 
I am in.

JMuFF808 03-08-2013 08:52 PM

Are these demello offroad bumpers?
Edit: nvm read it again and answered my own question

Socalduckslayer 03-08-2013 08:55 PM

They are Pelfreybilt, I don't believe Demello makes a 2012+ bumper. They don't make bumpers with integrated LED bar options either. They make some really nice stuff never the less.

xct2000 03-09-2013 12:21 AM

Front plate bumper
 
I'm in. With fog cut outs and center tube only with lateral supports.

Monster Coma 03-09-2013 11:43 AM

Quote:

Originally Posted by Mike Pinsker (Post 6560483)
I am in.

Quote:

Originally Posted by xct2000 (Post 6561138)
I'm in. With fog cut outs and center tube only with lateral supports.

Gotcha :)

Spoonman 03-09-2013 11:48 AM

3hoop is so hot :thumbsup:

Monster Coma 03-10-2013 01:05 PM

bump :D

chris5255 03-10-2013 01:14 PM

I am in.

Monster Coma 03-10-2013 01:21 PM

Quote:

Originally Posted by chris5255 (Post 6566737)
I am in.

:thumbsup:

Socalduckslayer 03-11-2013 11:13 AM

Thanks guys, I'm ready to start building these things. Need some more to make this thing official

rpriest500 03-11-2013 04:31 PM

Front Bumper
 
Trading 2010 FJ for 2013 Taco. Gave SUV/FJ a try. Doesn't fit what I wanna do. Back to a pick up. Need a good front bumper. Full tubes. No fogs. Black truck. Do I need powder coat or is it black already? St. Louis area CST. https://picasaweb.google.com/LooseLe...33970190402194

Monster Coma 03-11-2013 04:36 PM

Quote:

Originally Posted by rpriest500 (Post 6573149)
Trading 2010 FJ for 2013 Taco. Gave SUV/FJ a try. Doesn't fit what I wanna do. Back to a pick up. Need a good front bumper. Full tubes. No fogs. Black truck. Do I need powder coat or is it black already? St. Louis area CST.https://picasaweb.google.com/LooseLe...33970190402194

Would need to be powdercoated as these are made bare metal

max2 03-11-2013 05:43 PM

What is the approximate weight with full upper tubes, 3 piece center and headlight? No other cutouts or anything.

Monster Coma 03-11-2013 05:44 PM

Quote:

Originally Posted by max2 (Post 6573637)
What is the approximate weight with full upper tubes, 3 piece center and headlight? No other cutouts or anything.

I believe its 170# Tyler will correct me if I'm wrong tho

Socalduckslayer 03-11-2013 05:57 PM

Quote:

Originally Posted by max2 (Post 6573637)
What is the approximate weight with full upper tubes, 3 piece center and headlight? No other cutouts or anything.

Appx 110lbs


All times are GMT -7. The time now is 05:41 PM.