CAN SOMEONE HELP ME WITH BHLM IN SOCAL ASAP

I need help with BHLM just did it put it in the oven and started prying it will not come apart. Maybe can someone help me in socal. I will pay. ASAP


THANKS,
JACE

 

where in socal

 

Huntington BEACH

 

BEACH! haha

anyway, i put mine in at 300 degrees (oven off after preheating) and used a flathead screwdriver to pry it. it doesn't come apart that easily. did you also take off the torx screws?

 

yea it just wont come apart

 

Put it back in the over that is preheated for 325 now since it didnt work.

Make sure its off when you place it back in. Use a towel to over the clear lens.

Wait exactly 10 minutes. Use a timer.


Take it out the oven. Have 2 Flat Heads Ready.

Start @ the lower Corner of the headlight by the bumper and lower portion of the grille. Basically the lower left area. Pry it apart and pull it outwards and it has to come apart.


Make sure you have moved the tabs outwards away from the clear tabs so you dont break them...

Should work easily.

As you go, youll have to pry it some more. Use the flat head to hold it in place and use the other one to pry while you're pulling