1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Tail light tint advice

Discussion in 'Lighting' started by francis1291, Oct 9, 2010.

  1. Oct 9, 2010 at 10:33 AM
    #1
    francis1291

    francis1291 [OP] Well-Known Member

    Joined:
    Sep 27, 2010
    Member:
    #43911
    Messages:
    1,160
    Gender:
    Male
    Vehicle:
    10 4x4 SR5 super white
    3" procomp lift wit 20" rockstars on 33 toyo mt's
    I just tinted my taillights and was waondering if i should put clear coat over them or can i just do it another day? I let them dry for about 2hrs. can i go through a car wash or will it mess up the lights?
     
  2. Oct 9, 2010 at 10:38 AM
    #2
    cortez_55

    cortez_55 Member

    Joined:
    Sep 2, 2010
    Member:
    #42638
    Messages:
    21
    Gender:
    Male
    First Name:
    Ray
    Yuma az
    Vehicle:
    Silver 05 TRD Sport prerunner
    40 series flowmaster,2.5 inch level lift up front,black badges,alpine deck and type r speackers with a dual cvr kickers behind the rear seat with a hifonics amp,5% tint,17x8.5 fuel octanes with 285/70/17bfg all terrain,painted bumper
    well if you go to a carwash after the taillights have dryed for the two hours i think you should be fine
     
  3. Oct 9, 2010 at 11:34 AM
    #3
    zeeya2000

    zeeya2000 Cajun Taceaux

    Joined:
    Jun 21, 2010
    Member:
    #39301
    Messages:
    630
    Gender:
    Male
    First Name:
    Craig
    Lafayette, Louisiana
    Vehicle:
    Bad-Ass PreRunner
    Flowmaster super 10 series turndowns/ Volant CAI system/ Alpine deck, Alpine bass speakers throughtout with tweeters, Alpine PLT-5 Sub/ Blacked out front bumper and door handles/ 5% and 20% tint/ Bilstein 5100 adjustable shocks all the way around with a 1.5'' block lift in the rear/ also removed my running boards and mudflaps/ Blacked out badges - TRD windshield banner - TRD third brake light cover (all courtesy of SockMonkey)
    yes you should be fine. why not wash it yourself at home. much better than carwashes. but yea just apply a coat of clear coat later no rush necessary
     
  4. Oct 9, 2010 at 1:04 PM
    #4
    Viet2100

    Viet2100 Well-Known Member

    Joined:
    Jun 27, 2007
    Member:
    #1930
    Messages:
    2,505
    Gender:
    Male
    First Name:
    Viet
    South Florida
    Vehicle:
    2016 Prius 4T
    car washes and brushes = swirls.
     
  5. Oct 9, 2010 at 6:24 PM
    #5
    zeeya2000

    zeeya2000 Cajun Taceaux

    Joined:
    Jun 21, 2010
    Member:
    #39301
    Messages:
    630
    Gender:
    Male
    First Name:
    Craig
    Lafayette, Louisiana
    Vehicle:
    Bad-Ass PreRunner
    Flowmaster super 10 series turndowns/ Volant CAI system/ Alpine deck, Alpine bass speakers throughtout with tweeters, Alpine PLT-5 Sub/ Blacked out front bumper and door handles/ 5% and 20% tint/ Bilstein 5100 adjustable shocks all the way around with a 1.5'' block lift in the rear/ also removed my running boards and mudflaps/ Blacked out badges - TRD windshield banner - TRD third brake light cover (all courtesy of SockMonkey)
    exactly
     
  6. Oct 10, 2010 at 7:53 AM
    #6
    Rocketball

    Rocketball If The World Didn't Suck, We'd All Fall Off

    Joined:
    Mar 18, 2009
    Member:
    #14869
    Messages:
    2,079
    Gender:
    Male
    First Name:
    Scott
    Westminster, MD
    Vehicle:
    08 Speedway Blue DC Sport 4x4
    Pioneer head unit, PAC steering wheel control modual, Hard wired Sirius radio, Hard wired radar detector, Hella Supertone horns, Blacked out badges, Smoked Tails, BHLM (color matched Speedway Blue), T-Rex Eyelids, Black Powder Coated Billet Grill, Color Matched Engine Cover, Lund in channel vent visors, FJ Cruiser wheels, Leer 100XQ shell, OEM bed mat, Piezo beeper for locking doors, Tinted front side windows, Black Westin bull bar, Aires tube steps, Mini Maglite Mod, D-Cell Maglite Mod, Weathertech Digifit Floor Mats
    If you wait and do the clear coat another day, make sure you clean them really good before painting.
     
  7. Oct 10, 2010 at 11:53 AM
    #7
    francis1291

    francis1291 [OP] Well-Known Member

    Joined:
    Sep 27, 2010
    Member:
    #43911
    Messages:
    1,160
    Gender:
    Male
    Vehicle:
    10 4x4 SR5 super white
    3" procomp lift wit 20" rockstars on 33 toyo mt's
    I tinted them yestarday and i was just wondering would it of mattered if i sanded them? When you get close close you can see that it is not smooth or will the clear coat make that go away?
     
  8. Oct 10, 2010 at 5:05 PM
    #8
    Who Dat Popcorn

    Who Dat Popcorn Dafuq

    Joined:
    Feb 28, 2008
    Member:
    #4992
    Messages:
    1,439
    Gender:
    Male
    First Name:
    Ricky
    Richmond, VA
    Vehicle:
    Sold :/
    SOLD
    Yeah you can wet sand them with a high grit. Then put the clear over them.
     
  9. Oct 10, 2010 at 6:02 PM
    #9
    francis1291

    francis1291 [OP] Well-Known Member

    Joined:
    Sep 27, 2010
    Member:
    #43911
    Messages:
    1,160
    Gender:
    Male
    Vehicle:
    10 4x4 SR5 super white
    3" procomp lift wit 20" rockstars on 33 toyo mt's
    is wet sand when u let sandpaper sit it water then sand? sorry if that is a dumb ?. what kind of grit do u think i should use? if i sand them will that make them look dull and look like they got scratches all over them?
     
  10. Oct 10, 2010 at 6:29 PM
    #10
    zeeya2000

    zeeya2000 Cajun Taceaux

    Joined:
    Jun 21, 2010
    Member:
    #39301
    Messages:
    630
    Gender:
    Male
    First Name:
    Craig
    Lafayette, Louisiana
    Vehicle:
    Bad-Ass PreRunner
    Flowmaster super 10 series turndowns/ Volant CAI system/ Alpine deck, Alpine bass speakers throughtout with tweeters, Alpine PLT-5 Sub/ Blacked out front bumper and door handles/ 5% and 20% tint/ Bilstein 5100 adjustable shocks all the way around with a 1.5'' block lift in the rear/ also removed my running boards and mudflaps/ Blacked out badges - TRD windshield banner - TRD third brake light cover (all courtesy of SockMonkey)
    yes wet sand is when you get like a 1000 or 1200 grit sandpaper and have a bucket of water handy. dip it in the water, sand, dip it into water, sand, repeat. thats what i had to do to mine bc after i tinted mine they came out too dark so i wetsanded them and then put a clear coat. after wet sanding and adding clear coat it made it look like it had a matte finish. no noticeable scratches bc the clear coat helped that but it turns into a matted look instead of the glossy look (maybe if you put several coats of clearcoat it might make it glossy IDK?) . but that went well with my truck so i kept it. when you wet sand them be very careful and make sure you sand them evenly!!!!!!! or else you will get blotches. big no-no. just sand evenly
     
  11. Oct 10, 2010 at 6:30 PM
    #11
    fletch aka

    fletch aka www.BeLikeBrit.org

    Joined:
    Jan 4, 2009
    Member:
    #12223
    Messages:
    7,080
    Gender:
    Male
    First Name:
    Gary
    Left Coast
    Vehicle:
    09 Magnetic Gray TRD OffRoad
    TRD cat back exhaust, TRD Cold Air Intake, differential breather mod' Hellwig rear sway bar, 16x8 TRD Ivan Stewart's, Michelin LTX A/T2, DTRL Stealth Mode Mod, custom "Texas Edition" shift knob, Sock's "Classic" bedside decals, MetalMiller custom grill emblem, 20% front tinted windows, tinted taillights, Viper alarm, ScanGauge II, Flyzeye Designs V2W Tacoma Interior LED lighting, de-mud flapped, de-badged, extra D-rings under bed bolts, WeatherTech ED floor mats, G4 Elite Fold a Cover ,Toyota bed mat, tailgate theft deterrent device and absolutely no plasti-dip!
    This is with clear.

    [​IMG]
     
  12. Oct 10, 2010 at 6:35 PM
    #12
    zeeya2000

    zeeya2000 Cajun Taceaux

    Joined:
    Jun 21, 2010
    Member:
    #39301
    Messages:
    630
    Gender:
    Male
    First Name:
    Craig
    Lafayette, Louisiana
    Vehicle:
    Bad-Ass PreRunner
    Flowmaster super 10 series turndowns/ Volant CAI system/ Alpine deck, Alpine bass speakers throughtout with tweeters, Alpine PLT-5 Sub/ Blacked out front bumper and door handles/ 5% and 20% tint/ Bilstein 5100 adjustable shocks all the way around with a 1.5'' block lift in the rear/ also removed my running boards and mudflaps/ Blacked out badges - TRD windshield banner - TRD third brake light cover (all courtesy of SockMonkey)
    Before i fixed them...

    [​IMG]

    After i fixed them ...

    [​IMG]
     
  13. Oct 10, 2010 at 6:36 PM
    #13
    zeeya2000

    zeeya2000 Cajun Taceaux

    Joined:
    Jun 21, 2010
    Member:
    #39301
    Messages:
    630
    Gender:
    Male
    First Name:
    Craig
    Lafayette, Louisiana
    Vehicle:
    Bad-Ass PreRunner
    Flowmaster super 10 series turndowns/ Volant CAI system/ Alpine deck, Alpine bass speakers throughtout with tweeters, Alpine PLT-5 Sub/ Blacked out front bumper and door handles/ 5% and 20% tint/ Bilstein 5100 adjustable shocks all the way around with a 1.5'' block lift in the rear/ also removed my running boards and mudflaps/ Blacked out badges - TRD windshield banner - TRD third brake light cover (all courtesy of SockMonkey)
    Fletch .... did you wet sand them also?? or is that just tint and clearcoat
     
  14. Oct 10, 2010 at 6:38 PM
    #14
    fletch aka

    fletch aka www.BeLikeBrit.org

    Joined:
    Jan 4, 2009
    Member:
    #12223
    Messages:
    7,080
    Gender:
    Male
    First Name:
    Gary
    Left Coast
    Vehicle:
    09 Magnetic Gray TRD OffRoad
    TRD cat back exhaust, TRD Cold Air Intake, differential breather mod' Hellwig rear sway bar, 16x8 TRD Ivan Stewart's, Michelin LTX A/T2, DTRL Stealth Mode Mod, custom "Texas Edition" shift knob, Sock's "Classic" bedside decals, MetalMiller custom grill emblem, 20% front tinted windows, tinted taillights, Viper alarm, ScanGauge II, Flyzeye Designs V2W Tacoma Interior LED lighting, de-mud flapped, de-badged, extra D-rings under bed bolts, WeatherTech ED floor mats, G4 Elite Fold a Cover ,Toyota bed mat, tailgate theft deterrent device and absolutely no plasti-dip!
    I had them done by a body shop, I'm sure they sanded between coats.
     
  15. Oct 10, 2010 at 6:43 PM
    #15
    zeeya2000

    zeeya2000 Cajun Taceaux

    Joined:
    Jun 21, 2010
    Member:
    #39301
    Messages:
    630
    Gender:
    Male
    First Name:
    Craig
    Lafayette, Louisiana
    Vehicle:
    Bad-Ass PreRunner
    Flowmaster super 10 series turndowns/ Volant CAI system/ Alpine deck, Alpine bass speakers throughtout with tweeters, Alpine PLT-5 Sub/ Blacked out front bumper and door handles/ 5% and 20% tint/ Bilstein 5100 adjustable shocks all the way around with a 1.5'' block lift in the rear/ also removed my running boards and mudflaps/ Blacked out badges - TRD windshield banner - TRD third brake light cover (all courtesy of SockMonkey)
    they look great
     
  16. Oct 10, 2010 at 7:03 PM
    #16
    francis1291

    francis1291 [OP] Well-Known Member

    Joined:
    Sep 27, 2010
    Member:
    #43911
    Messages:
    1,160
    Gender:
    Male
    Vehicle:
    10 4x4 SR5 super white
    3" procomp lift wit 20" rockstars on 33 toyo mt's
    I will post some pics of them in a couple days. I got to get these college test out of the way first. Thank yall for help. Pics will be on soon.
     
  17. Oct 10, 2010 at 8:24 PM
    #17
    Who Dat Popcorn

    Who Dat Popcorn Dafuq

    Joined:
    Feb 28, 2008
    Member:
    #4992
    Messages:
    1,439
    Gender:
    Male
    First Name:
    Ricky
    Richmond, VA
    Vehicle:
    Sold :/
    SOLD
  18. Oct 10, 2010 at 8:27 PM
    #18
    francis1291

    francis1291 [OP] Well-Known Member

    Joined:
    Sep 27, 2010
    Member:
    #43911
    Messages:
    1,160
    Gender:
    Male
    Vehicle:
    10 4x4 SR5 super white
    3" procomp lift wit 20" rockstars on 33 toyo mt's
    Yea i looked at that b4 i did mine but i didnt think i needed to sand them. they look fine now i thikn they will look better after clear coat but i still debating if i wanta do a 3rd coat. there pretty dark now and debating if i wanta sand them. im knida nervous to do that
     
  19. Oct 10, 2010 at 8:30 PM
    #19
    Who Dat Popcorn

    Who Dat Popcorn Dafuq

    Joined:
    Feb 28, 2008
    Member:
    #4992
    Messages:
    1,439
    Gender:
    Male
    First Name:
    Ricky
    Richmond, VA
    Vehicle:
    Sold :/
    SOLD
    I mean, if you think you are going to mess up, then don't do it, haha.

    Just be ready to re-do your tails a lot sooner.
     
  20. Oct 10, 2010 at 8:32 PM
    #20
    francis1291

    francis1291 [OP] Well-Known Member

    Joined:
    Sep 27, 2010
    Member:
    #43911
    Messages:
    1,160
    Gender:
    Male
    Vehicle:
    10 4x4 SR5 super white
    3" procomp lift wit 20" rockstars on 33 toyo mt's
    so if i dont sand them i going to have to re paint them?
     

Products Discussed in

To Top