aftermarket foglights

my tacoma didnt come with stock foglights so i was gonna pick some up from autozone and since id want them on whenever the headlights are on, would it be a terrible idea to splice the wires from the fog lights to the lights to the headlights? if so, where would be a good spot to splice them in?

 

if you buy them from auto zone they might be a beam that shines to high to run all the time. if they are the more off road looking lights i know they come with a switch to use.. but if your set on wiring them with the headlights id probably look into wiring them into the same switch that you turn lights on with

 

thanks man i didnt realize how easy it was to pop off the spare switch covers and to access them from behind the dash so i got some thinkin to do

 

something you may look in to is. you’r truck is prob pre wired for stock fogs. so all you would need to do is get the switch and the lights them selfs. but you truck may not be. if it is you just have to take the black cup in the bumper out. and put the the lights in and hook the switch up.

 

You should have stock fogs wiring. Get some 510s.

http://www.tacomaworld.com/forum/lighting/165161-piaa-510-hid-conversion.html

 

no prewiring its all good tho i looked around and aside from auto zone i found some on ebay with an oem switch, all the wiring and 2 fog lights and after some fiddling last nite, i realize how easy it is to wire them. i couldnt see where the empty switch spots came out behind the dash and didnt see the giant rubber grommet in the firewall haha. thanks for all ur help!!