Headlight Adjustment

Just leveled out my 2010 , raised it 2.5" in front and now I am wondering if I need to adjust head lights down. Has anyone done this ? How to do it ? thanks

 

There's two grey "bolt looking" screws on the backside of your headlight. The "washers" on them have teeth, this is for a big Phillips head screwdriver. Put the screwdriver behind it and twist. The top one is up and down. Bottom toward your fender is left to right. It's easy to do

 

i dunno bout you but my bottom screw goes up and down and top goes left and right.

 

That's right. My bad, either way I hope he'd figure it out lol

 

Thanks for the info !

 

yea the top one on mine (2011 tx) has a black plastic clip on it. Why i have no idea. be careful taking it off it breaks very easily.

 

i know that clockwise is up, but is it the screw itself you turn clockwise, or the screwdriver??? thanks guys

 

screwdriver i believe, mark the original position with a piece of masking tape on ur flat surface for reference.............long phillips driver from the top

and always end in a clockwise motion to lock in the setting..........or so the FSM says

 

thank you very much man! appreciate the quick response.

new HIDs i put in were making me rage out

 

Confirmed, it's the screwdriver direction. Turn screwdriver CCW to move beams down and CW to move beams up.
Now I am confused on the final turn after adjusting. Is it screwdriver or screw turned CW on final turn???