Installing fog lights, headlights and tail lights soon

Hey, I installed fog lights on my tacoma! I didnt realize that it was already pre wired from the factory so all I had to do was install the lights, the switch and the relay. That saved me some time and they look awesome!!

Yesterday, I changed my taillights too. They look awesome compared to the stock ones. Now Im not sure what to do with the headlights. Should I install HID headlights or go with a regular blacked out headlight?? I have the HID ones at my house but Im not sure if I wanna install them or get different ones.

Let me know what yall think pls
Thank You

Here are some pics:
1 - tail lights
2 - fog lights installed(was too bright on iphone when i turned them on)
3 - my truck
4 - fog light on
5 - The headlight I have sitting in my garage-should i install it or get something more similar to the link below:

http://www.ebay.ca/itm/2005-2011-TA...r_Truck_Parts_Accessories&hash=item5ae2d2149b

 

did your truck have the black covers where the fogs are supposed to be?

 

Yes it did. They popped right out.

 

did you have to remove the bumper to do this

 

No, just the grill so you can get your hands in there. You can actually just pop them out from the front. You gotta be carefully that you don't scratch the paint though. I took the grill off because I thought I had to wire them too but It turns out that they are prewired. All I needed was the lights, switch and relay.

 

what year is your taco?

 

2007 sr5

I just installed those headlights too. Haven't taken any pics yet but it looks good. Now onto the rims!!

 

I have an 06 SR5 2.7l and want to install fogs as well... do you know if mine comes wired stock like yours?

 

damnnn

 

Well I'm wiring hella driving lights behind my satoshi soon but I still have no stock fogs lol. Either way the wiring would be hard to do, I was jsut wondering if it was there already. OP where did you get your fogs?

 

Hey do I installed the lights and now the wiring too. What ya guys think?? I can also rewire it so that the halos and the LEDs stay on as daytime running lights and for the signal. That would leave the regular bulb and the bar above it on when I activate the headlights.

Any opinions, ideas, suggestions??? Please lemme know what ya think?

 

I found this link to be the most helpful in giving an idea of how it goes.

http://www.toyotapart.com/tacomafog.html

 

I have fog lights and I put them in and have installed the lights, connected the wires in the engine compartment and ran one wire through the firewall. Connected it to the switch grounded the switch and I have one more wire that has to be spliced into the Low Beams wire

can anyone out there drop a quick note to help me identify which wire near the steering column is the low Beam wire?

got a 2011 SR5 4cyl manual shift