Gatling gun shrouds

How do I get the gatlin gun shrouds to connect to the mini morromoto d2s? The instructions say that they do not use the clip and that they glued them?!?!

 

This is the instructions from TRS. Page 3 shows how the 'con'centric ring should be positioned. The notches on the centric ring slide into the shroud.

I put some silicone clue to the concentric ring channel/recess and glued them to the shrouds. I put a soup can over the ring to prevent it from popping off the shrouds while the glue dried. Once dried, I put some glue on the inside of centric ring and placed them on the projector.

Just make sure you clean up and excess glue on the centric ring. Position the Gatling shrouds within the projector so they are evenly aligned between the pair of projectors for a clean professional look.

I love how the Gatling shrouds reflect on the reflector bowl.

 

yeah, thats what i ended up doing. i am in hour 7 of my retro fit. the only thing left is to reassemble the 2nd light and put it in. all wires have been run and the first light that i installed is working