Headlight adj after 2.5" and 1.5 aal

is there a way to measure or calculate to put my headlights back to stock ht
so there not riding so hi after lift

 

Check your local dmv law to set them to the legal height.

 

This^
Should be something like, the center of intensity should be 4" down at 25'.
But check first.

 

just do this.

1. Find a level surface and a vertical wall or garage door. Park the vehicle close to the wall and, using the masking tape, mark the low-beams' horizontal centerlines.
2. Mark the vertical centerlines of each beam and the center of the vehicle with masking tape. Marking the vehicle centerline is helpful to determine side to-side alignment, or lack thereof.
3. Move the vehicle 25 feet straight backwards. Turn the horizontal-vertical adjusting screws to position the low beam hot spots two inches below and to the right of the taped centerlines.

 

^^
That's all you need to do.