Mike "Wuzzy121". Rest in peace, brother

Go Back   Tacoma World Forums > Tacoma Garage > Lighting

Notices

Retro fit coming soon...

Reply
 
Thread Tools Search this Thread
Old 05-26-2013, 04:14 PM   #1
Joben [OP] Joben is offline
Member
Joben will become famous soon enoughJoben will become famous soon enough
 
Joben's Avatar
Name: Chris
Joined: Mar 2013, #98882
Location: Wilmington, DE
Gender: Male
Posts: 46
Joben's Tacoma Gallery
Retro fit coming soon...

Retro fit coming soon...-imageuploadedbytapatalk1369605878.944725.jpg

Got used stock headlights off eBay to do BHLM and a retro fit with ds2 projectors....

I've done my research and have a bunch of threads bookmarked to get me through the mod.

Any words of warning or suggestions would be greatly appreciated to make this project as smooth as possible.

Also can't seem to find a write up on the fog light retro fit using the bi xenon matchbox kit from TRS, has anyone done this mod? Was just going to follow the procedures laid out for the blazer retro fit
  Reply With Quote
Old 05-26-2013, 04:22 PM   #2
Senior Member
Asianguywithatruk is on a distinguished road
Joined: Jan 2013, #95517
Location: Bay area ca
Gender: Male
Posts: 138
Asianguywithatruk's Tacoma Gallery
Subd. I'm in the same situation as you. Got all my stuff sitting on the living room floor for over a month.
  Reply With Quote
Old 05-30-2013, 06:20 PM   #3
Junior Member
04TacomaLimited is on a distinguished road
Joined: May 2013, #105243
Location: San Diego
Gender: Male
Posts: 25
04TacomaLimited's Tacoma Gallery
I'm about to do my retrofit soon also. I'm using TL projectors with eBay housings. Will post up pics when I'm done. Fortunately, I've got two brothers who has done retrofits before, but not on trucks. If you're afraid of putting the headlights in the oven, you can use a blow dryer. It'll take more time, but safer than melting anything. Good luck!
  Reply With Quote
Old 05-30-2013, 06:33 PM   #4
Don't Tread On Me
08PRELB has much to be proud of08PRELB has much to be proud of08PRELB has much to be proud of08PRELB has much to be proud of08PRELB has much to be proud of08PRELB has much to be proud of08PRELB has much to be proud of08PRELB has much to be proud of08PRELB has much to be proud of08PRELB has much to be proud of
 
08PRELB's Avatar
Navy: US NAVY SEABEE CONSTRUCTION MECHANIC
Name: Adam
Joined: Jun 2010, #38329
Location: 805
Gender: Male
Posts: 1,065
08PRELB's Tacoma Gallery
If you can do BHLM you can retrofit a set mini d2s. Just take your time and you'll be fine, let your paint/ sealant cure for a good three days. And before you put the lights back together make sure you check the horizontal alignment of your cut off.
  Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Similar Threads
Thread Thread Starter Forum Replies Last Post
HELP with retro fit Redneckgeorgiaboy 2nd Gen. Tacomas 4 02-09-2013 10:31 PM
Retro fit advice Cajun1 Lighting 1 03-21-2012 10:42 AM
My FX-R Retro-fit G-Sak Lighting 49 02-03-2012 04:13 PM
My first retro fit jesusc 2nd Gen. Tacomas 23 12-15-2011 05:45 PM
Want to Retro Fit my HIDS bellassaiw10 Lighting 2 01-12-2011 05:21 PM


Copyright © 2014 Tacoma Forum. Tacoma World is not owned by, or affiliated with Toyota Motor Corporation.