1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Couple Questions After BHLM and Retrofit

Discussion in 'Lighting' started by iJDub, Dec 8, 2013.

  1. Dec 8, 2013 at 2:44 PM
    #1
    iJDub

    iJDub [OP] Well-Known Member

    Joined:
    Dec 26, 2010
    Member:
    #48225
    Messages:
    1,118
    Gender:
    Male
    So I did the BHLM / Retrofit with some Depo headlights...couple things/issues/concerns:

    1) The black bezel after I painted it back, when I set it back into the clear lens, it made contact with the lens at 2 points and the paint rubbed/distorted. Very minor and small - I can live with it. Is this just an issue with aftermarket headlight quality/tolerances?

    2) Once I put the Retrofit H4 projectors in and the bulb, when I went to slip on the black rubber boot, I noticed technically it's not 100% sealed...moisture can still get in (and out I suppose) through it...is that normal? Should I put some silicone there to seal it up?

    Other than that I'm very happy with results.
     

Products Discussed in

To Top