Advice on FX-R order from TRS

I emailed theretrofitsource.com for an order I want to place concerning compatibility and I haven't heard back from them, so I figurred I would post here and hopefully somebody would know.

What would you change to the order shown below, or does it look ok? There are so many options and I want to see what memebers who have FX-R's think.

Thanks!
________________________________
Bi-xenon FX-R Stage IV Kit
Advanced Install Universal Retrofit Kit

Edit
Projectors : 1 x FX-R 3.0: (2.5" Lens/LHD) $0.00 Ballasts: 1 x D2S: Denso Slim $0.00 Bulbs: 1 x D2S: Osram Xenarc 66240 $5.00 Shrouds: 1 x Apollo 2.0 Flat $0.00 Wire Harness: 1 x MotoControl Bixenon: H4/9003 $0.00 Halos: 1 x 100mm Amber $50.00 Glue: 1 x OCI Butyl Rubber Glue $10.00

 

Looks fine to me. I pretty much have same set up except I used morimoto ballast/bulbs

 

Should be fine with 0 ballast issues. Careful of those damn Halos. Another members failed after a few uses and only lights up 2/3.

I kept my retro simple for less change of problems