ddm hid help?????

just got my new 35w raptor hid kit from ddm
just went to install them and idk what the hell is going on
where do you guys mount the ballasts???
the instructions they give me suck ....on the bulb with the rubber gromet i have a red and a black with copper leads wth do they go???
i need some help

 

Just follow my diagram in my photo bellow...

On the factory fog plug (This is the plug you will disconnect from your factory fog bulbs)

Solid Green Wire side is + Positive ~ The red copper lead slides into the Green wire contact on factory fog plug

White/Black Wire side is - Negative ~ The black copper lead slides into the White/Black wire contact on the factor fog plug

Oh and you don't need those black rubber grommets...Just carefully cut them away from the wires and pull them off

 

Pics of how I mounted my ballast http://www.tacomaworld.com/forum/lighting/60978-ddm-tuning-hid-13.html Look at post #243

If your gonna use Velcro, you have to buy the 3M Dual Lock clear Velcro

It's the strongest stuff you can buy

Ace hardware sells it

 

dam that was the best.......now tomm. i can install them...and that was gonna be my next question...about the black rubber thing
they could send you better inst. with these things.....
how do you like yours>

 

I love my HIDS!

I also just did the fog lights anytime mod on my truck

Now I can run just my HID fog lights without having my headlights on
​

 

I don't know if you have already done the install, but I've got DDM HIDs in my fogs and, as far as wiring them up, its real easy to do.

Unplug your factory fogs and unplug and pull out the wires without a connector off the DDM ballast (the plug/wires on the left side of blazze2005 pic) you will not be needing these anymore. The factory plug should plug directly into the ballast. Test them out, and it should work.

Hopefully this makes some sense. If not, I'll try and get a picture of my setup sometime.

 

i tried to install them again today what a bitch i have no idea... what a shitty system this is... im ready to forget this whole thing

 

If your going wheeling with us tomorrow i will take a look at it. I put HIDs in my 08 when i had it.

 

wtf are with the wires "red & black" spade terminal wires????
this is crap

 

thanks for the offers and help guys..
well i just installed the bulbs......really had to push hard to get them in but they are in...
then i cut out the red and black spaded terminal wires and rubber gromet... then checked them they worked...
now i was thinking about mounting the one ballast on the battery is that a good idea or no??? to hot?>/?

update finished...works great and looks even better.....
they should tell you that you do not need the red and black wires......would have made life much easier....
thanks guys.....
now i will order the headlight hids soon