1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

need advice

Discussion in 'Lighting' started by j1999t, Dec 9, 2010.

  1. Dec 9, 2010 at 8:06 PM
    #1
    j1999t

    j1999t [OP] Well-Known Member

    Joined:
    May 13, 2009
    Member:
    #17165
    Messages:
    819
    Gender:
    Male
    First Name:
    Justin
    Northern Colorado
    Vehicle:
    traded it in
    i just got a set of hella 700ff's to go with the set of hella 700ff's i already had installed and wired and working on my tacoma, what do i need to do to ensure that when i wire in the new set to the old set, that i will not blow a fuse, relay or switch...

    do i just wire in the power to my existing power wire? i plan on running everything to just one switch...

    the relay that comes with is 40Amps, will that be enough for both sets?

    the stock fuse as well?


    thanks all
     
  2. Dec 15, 2010 at 11:36 AM
    #2
    BoostingMS6

    BoostingMS6 Well-Known Member

    Joined:
    Sep 21, 2010
    Member:
    #43565
    Messages:
    772
    Gender:
    Male
    First Name:
    Alex
    El Paso, TX
    Vehicle:
    1995.5 Tacoma Xtra Cab V6
    Four lights at 55W (I think 700's are 55W, no?) = 220W
    Current drawn from 220W at 12V is 18.4 Amps (220W/12V = ~18.4A).

    Sounds like you should be set :D
     

Products Discussed in

To Top