Finally finished LEDS - cupholders, console, and bed lights

Now I can finally see shit at night!!!

The shit:





4 different LEDS run thru the center console and tucked in wire loom and ready for install...











Wires ran to the WAGO's and then cleaned up with ZIP ties and ready for center console to go in then PLUG n PLAY:





Now cupholders are done:









Done installing the shit:





Took the hoodscoop apart:











Got light put in and got the scoop back on the truck:









To find an opening without cutting or poking, I put an LED flashlight in the engine bay pointed at the boot, then I got inside the truck and saw the light shining thru a small opening. I pushed the wire thru and it was perfect! I taped other wires to the red power wire and drug them thru with no problems or hangups.







Ran wires from hoodscoop thru the hood down into some wireloom:





Excellent ground for all this shit:



Bought 2 of these http://www.oznium.com/scion-switch-led
1 for the scanner and the other one for the LED's under my foot wells and under both seats.

They are for a Scion but they fit AMAZING and look factory. I had to take a razor blade and shave off the left side plastic in the hole. Then they went in perfect.











DONE! Now for the finished "RICE":

 

NICE! Are they switched independently or just off the dash lights?

 

Nice work man. Cool ambient lighting, and what looks to be a clean job.

 

Oh, and S.O.A....FTW!!

 

does the center console just pull out after you take the upholders and the two screws out?
Looks good BTW I like it!

 

thank you..... They are on an Oznium toggle switch with the LEDs that are under the dash and under the seats... All 11 leds come on with a flick of a switch. My led bed lights are next...i have them just haven't done it yet.

 

Take out cup holder, unscrew 2 screws, then........ Open console, gently stick small flathead screwdriver...i used one for my sunglasses..... And pull up the carpet piece thats at bottom of center console... Under that is 2 10mm bolts... Take those out and it pulls right up.... Easy easy....it also allowed me to clean all down in between seats

 

If anyone needs details or info or pics.... Let me know. It was a fun as hell project. IM a neat freak so it all came out extra clean.......i might put more lights somewhere..i got 5 more. I got some night pics to.... Ill post later

 

i have this done also i have all blue. cup holders under dash under the rear seats and in a few different places all on a lighted led toggle!! looks sick i have a few crappy pics in my profile

 

Best show on tha mutha fuckin planet

 

Which LED's are those and did you use holders or bushings for them?? They don't look loke they stick out very far which is what I'm looking for.

 

They are ridiculously flush...i was way impressed how they barely stick out. I got 5mm wide angle leds... With holders. I got links to this stuff if needed.

 

When I ordered my LEDs from them they didn't send me the little black led holders! I need to get some so I can finish mine

 

they make a huge difference.... Radio shack 5 of em for $1 n change

 

I'm thinking red for my truck can you post links to where you got the lights please:

 

was it hard and have you done anything like this before.. I would love to do something like this but have no experience with electrical type stuff

 

he posted radio shack dude

 

He said he got the holder at Radioshack nothing about the lights them selves.

 

When I get to work Monday morning ...i will post up everything I used with links, tips, and what to buy.....

For those asking about "was it easy" .... Yeah... I've been hooking up stereo systems, lighting,etc....and blah blah since high school but....... This shit is easy for a beginner and I can walk you thru it..... It was fun as fuck to do actually.... Those WAGO clamps are money for wiring.... They kick ass and make it easier than it already is.....i got LEDs, holders,WAGO clamps,etc for awesome pricing........... All this I did was around $20 total and an hour n half of time....... More info for ya'll Monday.