Tacoma World Forums

Tacoma World Forums (http://www.tacomaworld.com/forum/)
-   Lighting (http://www.tacomaworld.com/forum/lighting/)
-   -   Kragen LED/OEM Fog switch (http://www.tacomaworld.com/forum/lighting/223700-kragen-led-oem-fog-switch.html)

Krazie Sj 06-08-2012 09:13 AM

Kragen LED/OEM Fog switch
So I should be getting my Kragen 7" LEDs in the mail soonish. The amp draw on them is 3.5amps per light. I was wondering if anyone knew what whether it was possible to reuse the stock fog switch?

From what I gather the stock fogs use roughly 7.5amps with a max limit of 10amps on that switch.

I'm thinking I can either splice it into the wiring, or try to find a harness that will mate with the OEM harness and go that route.

Any ideas or am I going to burn my truck to the ground?

Pugga 06-08-2012 10:34 AM


Originally Posted by wolfpack_5150 (Post 5210217)
use a relay and the fog wire as a trigger worst case?

This would be a safe route but I believe you'll be fine using the stock switch. I've got a stock switch wired to a pair of PIAA 520's and I believe they draw more than your Kragens will.

Krazie Sj 06-08-2012 11:00 AM

Interesting. I might try just splicing it then and see what comes of that.

All times are GMT -7. The time now is 11:18 AM.